Skip to Content

Changes for page Servo Showing Err. 23?

Last modified by Jiahao Lai on 2026/01/16 10:13
From version 2.1
edited by Parth Makwana
on 2025/11/25 14:09
Change comment: There is no comment for this version
To version 3.1
edited by Parth Makwana
on 2025/11/25 14:09
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -7,4 +7,13 @@
7 7  
8 8  
9 9  
10 -
10 +Troubleshooting
11 +
12 +|=**Reason**|=**Troubleshooting methods**|=**Handling**
13 +|Internal brake resistance wiring error|Check whether C, D are connected to the short cap and the contact is normal|When using an internal braking resistor, reliably connect the shorting cap or shorting wire between C and D
14 +|External braking resistor wiring error|Check whether the external resistor is connected reliably between P+ and C.|When using an external braking resistor, the external resistor is reliably strung between P+ and C
15 +|**Internal braking resistor damaged**|**The servo drive is powered off. Detects whether the resistance between P+ and D is 50Ω**|(((
16 +Contact the technician to replace the internal braking resistor.
17 +
18 +Use an external braking resistor and change the relevant parameters of the P00 "Basic Settings".
19 +)))