Skip to Content

Changes for page Servo Showing Err. 23?

Last modified by Jiahao Lai on 2026/01/16 10:13
From version 3.1
edited by Parth Makwana
on 2025/11/25 14:09
Change comment: There is no comment for this version
To version 1.1
edited by Parth Makwana
on 2025/11/25 13:57
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,19 +1,1 @@
1 -== **Why the servo is showing Err. 23? ** ==
2 -
3 -
4 -
5 -(% style="text-align:center" %)
6 -[[image:1764050915292-784.png]]
7 -
8 -
9 -
10 -Troubleshooting
11 -
12 -|=**Reason**|=**Troubleshooting methods**|=**Handling**
13 -|Internal brake resistance wiring error|Check whether C, D are connected to the short cap and the contact is normal|When using an internal braking resistor, reliably connect the shorting cap or shorting wire between C and D
14 -|External braking resistor wiring error|Check whether the external resistor is connected reliably between P+ and C.|When using an external braking resistor, the external resistor is reliably strung between P+ and C
15 -|**Internal braking resistor damaged**|**The servo drive is powered off. Detects whether the resistance between P+ and D is 50Ω**|(((
16 -Contact the technician to replace the internal braking resistor.
17 -
18 -Use an external braking resistor and change the relevant parameters of the P00 "Basic Settings".
19 -)))
1 +**Why the servo is showing Err. 23? **
1764050915292-784.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.ParthMakwana
Size
... ... @@ -1,1 +1,0 @@
1 -94.1 KB
Content