Changes for page 06 Data Tool

Last modified by Jett on 2025/02/18 16:43

From 11.1 to 12.1 From 20.1 to 21.1

From version 12.1

edited by Hunter
on 2022/07/09 10:40

Change comment: There is no comment for this version

To version 20.1

edited by Stone Wu
on 2022/08/02 11:56

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (3 modified, 0 added, 0 removed)

Details

Page properties

Parent

@@ -1,1 +1,1 @@
--PIStudio.1 User Manual.WebHome
++PIStudio.WebHome

Author

@@ -1,1 +1,1 @@
--XWiki.Hunter
++XWiki.Stone

Content

@@ -3,29 +3,27 @@
  = **Alarm** =
--== **Bit Alarm** ==
++== Bit alarm ==
--Click "Project"->"Bit Alarm", it is displayed as the following figure.
++Click "Project"→"Bit Alarm", it is displayed as the following figure.
  (% style="text-align:center" %)
  [[image:位报警 1.png||data-xwiki-image-style-alignment="center" class="img-thumbnail"]]
--**(1) Group No.: **Group number of Bit alarm. The name is unique and cannot be duplicated.
++**Group No.: **Group number of Bit alarm. The name is unique and cannot be duplicated.
--**(2) Bit Address: **Bit address of alarm monitoring
++**Bit Address: **Bit address of alarm monitoring
--(% start="1" %)
--1. **Record bit alarm by default:**  Whether to record the alarm history data of bit alarm, if checked, it will be saved in the designated storage location.
--1. **Not save alarm OFF:** If checked, after the alarm is dismissed, the corresponding alarm records will be deleted from the log file.
++* **Record bit alarm by default:**  Whether to record the alarm history data of bit alarm, if checked, it will be saved in the designated storage location.
++* **Not save alarm OFF:** If checked, after the alarm is dismissed, the corresponding alarm records will be deleted from the log file.
--**(3) Upload to Cloud: **The data upload by "bit alarm" is stored in the Cloud and it is alarm data. (Only ig series and 8000/9000 series with -R after system upgrade are supported)
++**Upload to Cloud: **The data upload by "bit alarm" is stored in the Cloud and it is alarm data. (Only ig series and 8000/9000 series with -R after system upgrade are supported)
  **✎Note:**
--(1) After enable the Cloud and check the box of Upload to Cloud, the communication port settings of the address in the imported Bit Alarm record configuration must be the same as the communication port settings of the current project, otherwise it cannot be used normally.
++* After enable the Cloud and check the box of Upload to Cloud, the communication port settings of the address in the imported Bit Alarm record configuration must be the same as the communication port settings of the current project, otherwise it cannot be used normally.
++* The number of Alarm records upload to Cloud shall not exceed the limit value, or the sum of the imported alarm records and the number of existing alarm records shall not exceed the limit value. the specific limitation as following table:
--(2) The number of Alarm records upload to Cloud shall not exceed the limit value, or the sum of the imported alarm records and the number of existing alarm records shall not exceed the limit value. the specific limitation as following table:
--
  (% style="margin-left:auto; margin-right:auto; width:358px" %)
  |=(% style="width: 79px;" %)Series|=(% style="width: 276px;" %)Number of Alarm upload to Cloud
  |(% style="width:79px" %)8000-R|(% style="text-align:center; width:276px" %)200
@@ -33,20 +33,20 @@
  |(% style="width:79px" %)3000ig|(% style="text-align:center; width:276px" %)20
  |(% style="width:79px" %)8000ig|(% style="text-align:center; width:276px" %)200
--**(4) Alarm Condition:** It sets alarm trigger condition, there are two types: alarm when ON and alarm when OFF.
++**Alarm Condition:** It sets alarm trigger condition, there are two types: alarm when ON and alarm when OFF.
--**(5) Alert: **It is used to mark whether the alarm has occurred. if an alarm occurs, the address of "control bit" will be written to 1. If "clear alert when alarm OFF" is checked, the address of "control bit" will be written to 0.
++**Alert: **It is used to mark whether the alarm has occurred. if an alarm occurs, the address of "control bit" will be written to 1. If "clear alert when alarm OFF" is checked, the address of "control bit" will be written to 0.
--**(6) Beep when alarm ON: **The beep works when the alarm is triggered. If "beep once" is checked, bit address alarm only beep once and stop.
++**Beep when alarm ON: **The beep works when the alarm is triggered. If "beep once" is checked, bit address alarm only beep once and stop.
--**(7) Content: **It is used for setting alarm content (command).
++**Content: **It is used for setting alarm content (command).
--**(8) Alarm Screen: **Pop-up alarm screen (it need to be sub-screen);
++**Alarm Screen: **Pop-up alarm screen (it need to be sub-screen);
--1. **Position: **The location of the screen alarm display.
--1. **Pop-up Interval: **The time of reopen the alarm screen when alarm screen closed.
--1. **Pop-up once: **Pop up alarm screen once, and the screen would not pop up again
--1. **Close window when alarm off: **Automatically close the alarm screen when alarm off.
++* **Position: **The location of the screen alarm display.
++* **Pop-up Interval: **The time of reopen the alarm screen when alarm screen closed.
++* **Pop-up once: **Pop up alarm screen once, and the screen would not pop up again
++* **Close window when alarm off: **Automatically close the alarm screen when alarm off.
  **✎Note:**
@@ -55,42 +55,40 @@
  **Operating Procedures of Adding One Alarm**
--1. Click "Project"->"Bit Alarm" as below shows.
++* Click "Project"→"Bit Alarm" as below shows.
  (% style="text-align:center" %)
  [[image:8.Basic Function_html_5f8da20315334bac.png||data-xwiki-image-style-alignment="center" height="144" width="539" class="img-thumbnail"]]
--(% start="2" %)
--1. Click "Add" button to open "Bit Alarm" setting window.
++* Click "Add" button to open "Bit Alarm" setting window.
  (% style="text-align:center" %)
  [[image:8.Basic Function_html_94a019683b506e15.png||data-xwiki-image-style-alignment="center" height="307" width="554" class="img-thumbnail"]]
--(% start="3" %)
--1. Set "Bit Address".
--1. Set "Alarm Condition".
--1. Set "Content".
--1. Other settings can be set according to the actual situation".
--1. Click "OK" button to complete settings.
++* Set "Bit Address".
++* Set "Alarm Condition".
++* Set "Content".
++* Other settings can be set according to the actual situation".
++* Click "OK" button to complete settings.
--== **Word Alarm** ==
++== Word alarm ==
  Word alarm is to monitor the word address of a device. If the data meets the set conditions, an alarm will be generated.
--Click "Project"->"Word alarm", it is displayed as the following figure.
++Click "Project"→"Word alarm", it is displayed as the following figure.
  (% style="text-align:center" %)
  [[image:字报警 1.png||class="img-thumbnail"]]
--**(1) Alarm Name:** You can set alarm name for it. Alarm Name can only consist of (0~~9), (a~~z), (A~~Z), ('_'), (' ') and other non-English characters.
++**Alarm Name:** You can set alarm name for it. Alarm Name can only consist of (0~~9), (a~~z), (A~~Z), ('_'), (' ') and other non-English characters.
--**(2) Alarm Address: **It is used for setting word address for word alarm, such as HDW0.
++**Alarm Address: **It is used for setting word address for word alarm, such as HDW0.
--**(3) Data Format: **16-bit unsigned decimal, 16-bit signed decimal, 16-bit BCD, 32-bit unsigned decimal, 32-bit signed decimal, 32-bit BCD, 32-bit float.
++**Data Format: **16-bit unsigned decimal, 16-bit signed decimal, 16-bit BCD, 32-bit unsigned decimal, 32-bit signed decimal, 32-bit BCD, 32-bit float.
--**(4)  Group No.: **Group number of word alarm. The name is unique and cannot be duplicated.
++**Group No.: **Group number of word alarm. The name is unique and cannot be duplicated.
--**(5) Upload to Cloud: **The data upload by "word alarm" is stored in the Cloud and it is alarm data. ((Only ig series and 8000/9000 series with -R after system upgrade are supported))
++**Upload to Cloud: **The data upload by "word alarm" is stored in the Cloud and it is alarm data. (Only ig series and 8000/9000 series with -R after system upgrade are supported)
  **✎Note:**
@@ -97,22 +97,29 @@
  * If the "cloud" function is enabled and "upload to cloud" is checked, the communication port of the address in the configuration of the imported word alarm record must be the same as that of the current project; otherwise, it cannot be used normally.
  * The number of alarm configuration points reported to the cloud cannot exceed 20, or the sum of imported alarm records and the current alarm records cannot exceed 20. If it exceeds, please reconfigure.
--**(6) Record alarm:**  Whether to record the alarm history data of word alarm, if checked, it will be saved in the designated storage location.
++(% style="margin-left:auto; margin-right:auto; width:358px" %)
++|=(% style="width: 79px;" %)Series|=(% style="width: 276px;" %)Number of Alarm upload to Cloud
++|(% style="width:79px" %)8000-R|(% style="text-align:center; width:276px" %)200
++|(% style="width:79px" %)9000-R|(% style="text-align:center; width:276px" %)200
++|(% style="width:79px" %)3000ig|(% style="text-align:center; width:276px" %)20
++|(% style="width:79px" %)8000ig|(% style="text-align:center; width:276px" %)200
--**(7) Not save alarm OFF:** If checked, after the alarm is dismissed, the corresponding alarm records will be deleted from the log file.
++**Record alarm:**  Whether to record the alarm history data of word alarm, if checked, it will be saved in the designated storage location.
--**(8) Alarm Condition**: Alarm is triggered when designated address meets the alarm condition, it provides four conditions;
++**Not save alarm OFF:** If checked, after the alarm is dismissed, the corresponding alarm records will be deleted from the log file.
++**Alarm Condition**: Alarm is triggered when designated address meets the alarm condition, it provides four conditions;
++
 . **High alarm:** Alarm is triggered when it reaches high limit. It can be a constant or a variable
 . **Low alarm:** Alarm is triggered when it reaches low limit. It can be a constant or a variable
 . **Range alarm:** Alarm is triggered when it exceeds the range. It can be a constant or a variable
 . **Equivalent alarm: **Alarm is triggered when the value equals to the given data. It can be a constant or a variable
--**(9) Alarm Info: **It is used for setting alarm content (command);
++**Alarm Info: **It is used for setting alarm content (command);
--**(10) Alert: **It is used to mark whether the alarm has occurred. if an alarm occurs, the address of "control bit" will be written to 1. If "clear alert when alarm OFF" is checked, the address of "control bit" will be written to 0.
++**Alert: **It is used to mark whether the alarm has occurred. if an alarm occurs, the address of "control bit" will be written to 1. If "clear alert when alarm OFF" is checked, the address of "control bit" will be written to 0.
--**(11) Alarm Screen: **Pop-up alarm screen (it need to be sub-screen);
++**Alarm Screen: **Pop-up alarm screen (it need to be sub-screen);
 . **Position: **The location of the screen alarm display.
 . **Pop-up Interval: **The time of reopen the alarm screen when alarm screen closed.
@@ -119,38 +119,36 @@
 . **Pop-up once: **Pop up alarm screen once.
 . **Close window when alarm off: **Automatically close the alarm screen when alarm off.
--**(12) Beep when alarm ON: **beep works when the alarm is triggered, in the default mode, the beep works until the alarm is released.
++**Beep when alarm ON: **beep works when the alarm is triggered, in the default mode, the beep works until the alarm is released.
--**(13) Beep once:** Beep works once, when alarm is triggered.
++**Beep once:** Beep works once, when alarm is triggered.
--**(14) Alarm List**
++**Alarm List**
  It displays all the word alarm lists; it will show the alarm information;
  **Operating Procedures of Adding One Alarm**
--1. Click "Project"-> "Word Alarm" as below shows.
++* Click "Project"→ "Word Alarm" as below shows.
  (% style="text-align:center" %)
  [[image:8.Basic Function_html_1b59522c984cd7c2.png||height="144" width="492" class="img-thumbnail"]]
--(% start="2" %)
--1. Click [Add] button to open [Word Alarm] setting window.
++* Click "AddClick" button to open "Word Alarm" setting window.
  (% style="text-align:center" %)
  [[image:8.Basic Function_html_942107c81fc6901c.png||height="307" width="554" class="img-thumbnail"]]
--(% start="3" %)
--1. Set Basic information of word alarm.
--1. Set "Content".
--1. Other settings can be set according to the actual situation.
--1. Click "OK" button to complete settings.
++* Set Basic information of word alarm.
++* Set "Content".
++* Other settings can be set according to the actual situation.
++* Click "OK" button to complete settings.
  **HMI Alarm Demo Download Link**
  [[https:~~/~~/drive.google.com/open?id=1Llq03CMISM_1mMIfU308hxFbs4rGdQGP>>url:https://drive.google.com/open?id=1Llq03CMISM_1mMIfU308hxFbs4rGdQGP]]
--= **{{id name="_Toc17174"/}}{{id name="_Recipe"/}}Recipe** =
++= **Recipe** =
  Traditional recipe is composed of multiple groups of information with the same structure and different data. Due to the similarity of these information, you could edit them into a set of recipes to facilitate the transfer of data between HMI and PLC.
@@ -175,23 +175,20 @@
  (% style="text-align:center" %)
  [[image:8-1Recipe.png]]
--**(1) Basic**
++**Basic**
--1. **Recipe Folder:** Give Recipe folder name (It can be used, when setting Recipe display object);
++* **Recipe Folder:** Give Recipe folder name (It can be used, when setting Recipe display object);
++** **✎Note: **Recipe Folder name can only consist of (0~~9), (a~~z), (A~~Z), ('_'), (' ') and other non-English characters;
++* **Group: **It sets the groups' initial number of recipe;
++* **Elements:** It sets members' initial number of each group;
++* **Data Format:** There are some formats can be supported in Recipe, like 16-bit BCD, 16-bit signed, 16-bit unsigned, 32-bit BCD, 32-bit signed, 32-bit unsigned, 32-bit floating and string. If each member requires different formats, please set it one by one in form;
++* **Decimal: **It sets integer and scale digits;
--* **✎Note: **Recipe Folder name can only consist of (0~~9), (a~~z), (A~~Z), ('_'), (' ') and other non-English characters;
++**Mode Selection**
--(% start="2" %)
--1. **Group: **It sets the groups' initial number of recipe;
--1. **Elements:** It sets members' initial number of each group;
--1. **Data Format:** There are some formats can be supported in Recipe, like 16-bit BCD, 16-bit signed, 16-bit unsigned, 32-bit BCD, 32-bit signed, 32-bit unsigned, 32-bit floating and string. If each member requires different formats, please set it one by one in form;
--1. **Decimal: **It sets integer and scale digits;
--
--**(2) Mode Selection**
--
  Users could select Simple or Advanced mode.
--**(3) Function Address:**
++**Function Address:**
  All the operations for recipe is by this address
@@ -202,77 +202,83 @@
  * =8 Delete.
  * =16 Delete and Sequence.
--**(4) Use Multiple File**
++**Use Multiple File**
  Check it to use more than one recipe file in HMI, but this option only valid in [Advanced mode];
--**(5) Select language**
++**Select language**
  The text in HMI can be in 8 languages, user can set language in here;
--**(6) Address**
++**Address**
 . **Group:** This address is for selecting group number;
 . **Start: **This is starting address is for reading and writing in recipe, PIStudio will automatically assigns addresses for each members;
 . **File(16 words): **This address only available when enable the Use Multiple File. This setting address is for input the recipe file's filename.
--**(7) Use Index**
++**Use Index**
  If the value from Group address is changed, Read address will display the new data according to new group number immediately. Relatively, if the data of write address is changed, the corresponding group from table is also changed.
--**(8) Query by Element**
++**Query by Element**
  Enable it for querying group by specify element, select a primary key from all the elements, except the group number. This element value from all groups must be unique if want to set as primary key;
++(% class="box infomessage" %)
++(((
  **✎Note: **When this option is enabled, Group address will be invalid.
++)))
--**(9) Use Independent Write Address**
++**Use Independent Write Address**
  To separate Recipe read address and write address.
--**(10) Use Insert**
++**Use Insert**
  It inserts data into the specified group, if the specified group already exists, it would not cover the original data, while it will move the original group next one after it.
--**(11) Discontinuous Address**
++**Discontinuous Address**
  Whether enable the non-consecutive recipe operation addresses or not. If disabled, the recipe address will recover as the continuous addresses.
++(% class="box infomessage" %)
++(((
  **✎Note: **This function only supported in HMI+, i series, ie series, ig series.
++)))
  **Operating Procedures**
--1) Click "Project"->"Bit Alarm" as below shows.
++* Click "Project"→"Bit Alarm" as below shows.
  (% style="text-align:center" %)
  [[image:8.Basic Function_html_a7d1546a3a9f752f.png||height="144" width="535" class="img-thumbnail"]]
--2) Click "Add" button to open "Recipe" setting window.
++* Click "Add" button to open "Recipe" setting window.
  (% style="text-align:center" %)
  [[image:8.Basic Function_html_8f04e01413981054.png||height="307" width="554" class="img-thumbnail"]]
--3) Set basic settings for recipe.
++* Set basic settings for recipe.
++* Select mode according to actual condition.
++* Other settings can be set according to the actual situation.
++* Click "OK“ button to complete settings.
--4) Select mode according to actual condition.
--
--5) Other settings can be set according to the actual situation.
--
--6) Click [OK] button to complete settings.
--
  **Recipe Demo Download Link**
  [[https:~~/~~/drive.google.com/open?id=1Cjbq_tW-NIirHFBpxt47g7IKvoYaWqUR>>url:https://drive.google.com/open?id=1Cjbq_tW-NIirHFBpxt47g7IKvoYaWqUR]]
--= (% style="color:inherit; font-family:inherit; font-size:29px" %)**Traditional Recipe**(%%) =
++= (% style="color:inherit; font-family:inherit; font-size:29px" %)**Traditional recipe**(%%) =
  Traditional recipe is composed of multiple groups of information with the same structure and different data. Due to the similarity of these information, you could edit them into a set of recipes to facilitate the transfer of data between HMI and PLC.
  Traditional recipe function is valid only when the LEVI project is converted to the PI project, and the original project uses the traditional recipe.
++(% class="box infomessage" %)
++(((
  **✎Note**: Currently, only HMI+, i series, ie series, and ig series support the traditional recipe.
++)))
--== **Simple recipe mode** ==
++== Simple recipe mode ==
  Click the "Traditional Recipe" [[image:8-2TraditionalRecipe.png]] in the "Data tool" bar in the upper side of the software, and the following interface will pop up:
@@ -284,16 +284,19 @@
  * The recipe folder name can only consist of (0~~9), (a~~z), (A~~Z), ('_'), ('').
  * The element name of the recipe cannot include following 5 special characters: " **,** " , " **|** " , " **<** " , " **>** " , " **&** " .
--== **Recipe display** ==
++== Recipe display ==
  Select the file type "Traditional recipe file" in object "Recipe Display", and it is recommended to fill in the traditional recipe group number HSW1612 to the address of select line.
--**✎Note**: The Recipe Display can display up to 50 groups of 100 elements, which can be to display out of range by enabled "Address Control", as following shown:
++(% class="box infomessage" %)
++(((
++**✎Note**: The Recipe Display can display up to 50 groups of 100 elements by default, which can be to display out of range by enabled "Address Control". After the "Address Control" is enabled, the display group number can be reached to 100. If want to display more than 100, please adjust the "Start Group" from "Address Control" to index the display group, as following shown:
++)))
  (% style="text-align:center" %)
  [[image:8-4TraditionalRecipeDisplayConfigScreen.png||class="img-thumbnail"]]
--== **Recipe transmission address** ==
++== Recipe transmission address ==
  The special addresses used in the Recipe are shown in the following table:
@@ -344,26 +344,26 @@
 . The RPW register only supports word address access.
 . It can be known from the coding method of RPW~*~*~#~#~#~# that the range of RPW is from RPW000000-RPW990450, wherein the range of group number is 0-100, and the range of element is 0-450.
--== **Recipe example** ==
++== Recipe example ==
  The recipe index makes the modification and display of recipe data more convenient. Only need to modify and display the data of the recipe file through "Numeric Input/Display" Object and "Word Switch".
--(1) Edit the recipe configuration, create three groups of recipes, 4 elements for per group: Red, green, blue, spraying time, as following shown:
++Edit the recipe configuration, create three groups of recipes, 4 elements for per group: Red, green, blue, spraying time, as following shown:
  (% style="text-align:center" %)
  [[image:8-5TraditionalRecipeCaseConfig.png]]
--(2) RPW 0~~3 can display the data of group for the selected line. RPW10000~~10003, RPW20000~~20003, RPW30000~~30003 each address can display the single element. Directly modify the content of the RPW address and then modify the recipe data, as following shown:
++RPW 0~~3 can display the data of group for the selected line. RPW10000~~10003, RPW20000~~20003, RPW30000~~30003 each address can display the single element. Directly modify the content of the RPW address and then modify the recipe data, as following shown:
  (% style="text-align:center" %)
  [[image:8-7TraditionalRecipeCaseShowNoOpera.png]]
--(3) After selecting the 2nd group, trigger the download button to download the whole group data to the corresponding element address (For this case, the data will write into HDW0~~3), or trigger the upload button to upload the content of the element address to the specified recipe group.
++After selecting the 2nd group, trigger the download button to download the whole group data to the corresponding element address (For this case, the data will write into HDW0~~3), or trigger the upload button to upload the content of the element address to the specified recipe group.
  (% style="text-align:center" %)
  [[image:8-6TraditionalRecipeCaseShow.png]]
--= **{{id name="_Toc5565"/}}{{id name="_Trend_Chart"/}}Trend Chart** =
++= **Trend chart** =
  Trend chart function is used for displaying the real-time data in HMI as curve graph, which X axis represent as time, Y axis represent as data.
@@ -401,13 +401,16 @@
  **(4) Curve Table:** The sample address you have set would display on it. Click the corresponding box to modify the content.
++(% class="box infomessage" %)
++(((
  **✎Note: **Curve names can only consist of Chinese characters, (0~~9), (a~~z), (A~~Z), ('_') (' '), and other non-English characters.
++)))
  **Trend Chart Demo Download Link**
  [[https:~~/~~/drive.google.com/open?id=1smnaAvSxOWC0WQK4_uvqHXWn4vUZxGJC>>url:https://drive.google.com/open?id=1smnaAvSxOWC0WQK4_uvqHXWn4vUZxGJC]]
--= **{{id name="_Toc7121"/}}{{id name="_History_XY_Plot"/}}History XY Plot** =
++= **History XY plot** =
  Different from TrendChart, uses need to set history XY curve items in project. Please click "Project"-> "History XY Plot" to open the setting screen.
@@ -443,29 +443,31 @@
  **(4) Curve Table:** The sample address you have set would display on it. Click the corresponding box to modify the content.
++(% class="box infomessage" %)
++(((
  **✎Note: **Curve names can only consist of Chinese characters, (0~~9), (a~~z), (A~~Z), ('_') (' '), and other non-English characters.
++)))
  **Operating Procedure**
--1. Click "Project" -> "History XY Plot" to open the function selecting windows.
++* Click "Project" → "History XY Plot" to open the function selecting windows.
  (% style="text-align:center" %)
  [[image:8.Basic Function_html_5da6ca44bd28acbe.png||height="144" width="533" class="img-thumbnail"]]
--(% start="2" %)
--1. Click "Add" button to open [History XY Plot] setting windows.
++* Click "Add" button to open "History XY Plot” setting windows.
  (% style="text-align:center" %)
  [[image:8.Basic Function_html_6345b50ea55168fa.png||height="307" width="554" class="img-thumbnail"]]
--1. Setting the function of History XY Plot.
--1. Click "OK" to save the setting.
++* Setting the function of History XY Plot.
++* Click "OK" to save the setting.
  **Download Link**
  [[https:~~/~~/drive.google.com/open?id=1t4_HuRmIJJ-B5ryA2kVMadD9FywKhZ4r>>url:https://drive.google.com/open?id=1t4_HuRmIJJ-B5ryA2kVMadD9FywKhZ4r]]
--= (% style="color:inherit; font-family:inherit; font-size:29px" %)**Data Record**(%%) =
++= (% style="color:inherit; font-family:inherit; font-size:29px" %)**Data record**(%%) =
  The data record function is organized according to the structure below. In a project, there can be multiple record groups, each record group containing multiple channels. Different groups have different sampling times.
@@ -484,8 +484,23 @@
  For the file storage of data, see the file size configuration during data record configuration.
--✎**Note: **The record group name can only be composed of Chinese characters, (0~~9), (a~~z), (A~~Z), ('_'), ('') and other non-English characters.
++✎**Note: **
++After enable the Cloud and check the box of Upload to Cloud, the communication port settings of the address in the imported Data record configuration must be the same as the communication port settings of the current project, otherwise it cannot be used normally.
++
++The number of Data records upload to Cloud shall not exceed the limit value, or the sum of the imported Data records and the number of existing alarm records shall not exceed the limit value. the specific limitation as following table:
++
++(% style="margin-left:auto; margin-right:auto; width:513px" %)
++|=(% style="width: 70px;" %)Series|=(% style="width: 442px;" %)Number of Data Record upload to Cloud
++|(% style="width:70px" %)8000-R|(% style="text-align:center; width:442px" %)100
++|(% style="width:70px" %)9000-R|(% style="text-align:center; width:442px" %)100
++|(% style="width:70px" %)3000ig|(% style="text-align:center; width:442px" %)50
++|(% style="width:70px" %)8000ig|(% style="text-align:center; width:442px" %)100
++
++The record group name can only be composed of Chinese characters, (0~~9), (a~~z), (A~~Z), ('_'), ('') and other non-English characters.
++
++Channel name cannot incloud following symbols: ：" , ", " | ", " < ", " > ", " & ".
++
  (% class="wikigeneratedid" id="HSettings" %)
  **Settings**
@@ -564,7 +564,7 @@
  **[[Video Link>>https://drive.google.com/open?id=1h7VUsIJqH4LIRjjtphbv9Kmzd6jUMPtE]]**
--= **{{id name="_Toc3497"/}}{{id name="_User_Permission"/}}User Permission** =
++= **User permission** =
  **Introduction**
@@ -573,11 +573,14 @@
 . Operating record: it records user operations information, the records files are saved in HMI flash; its path is [~\~\flash~\~\UserOperationLogs.db].
 . When it is on simulator mode, the files are saved in C disk, its path is [C:~\~\WECON\UserMgrFile\UserOperationLogs.db].
++(% class="box infomessage" %)
++(((
  ✎**Note: **The user name and password must be unique.
++)))
--== **Settings** ==
++== Settings ==
--**Open PIStudio software, then operate as the following figure.**
++Open PIStudio software, then operate as the following figure.
  (% style="text-align:center" %)
  [[image:用户权限 1.png||class="img-thumbnail"]]
@@ -596,25 +596,26 @@
  * When the configured file does not have the administrator account, a new user can be added  through "Funtion address" and set as the administrator.
  * If you select hidden fucntion when configuring user account, the account would display as "~*~*~*~*~*~*" in the list. You only need to enter the password of the corresponding hidden user to log in.
--== **Object permission configuration** ==
++== Object permission configuration ==
  (% style="text-align:center" %)
  [[image:用户权限 2.png||class="img-thumbnail"]]
--{{id name="OLE_LINK3"/}}{{id name="OLE_LINK4"/}}**Operation Procedure of Object Permission**
++**Operation Procedure of Object Permission**
 . Open the object setting windows;
--1. Select [Security] windows;
--1. Check the [User Permission];
--1. Select [Level] to set permission level;
--1. Enter [Log Message], it is for operation records, if it was empty, the operation for this object would be not be recorded;
--1. Select the ~[[[Access Denied Setting>>path:#_Security]]] mode;
++1. Select "Security" windows;
++1. Check the "User Permission";
++1. Select "Level" to set permission level;
++1. Enter "Log Message", it is for operation records, if it was empty, the operation for this object would be not be recorded;
++1. Select the "[[Access Denied Setting>>path:#_Security]]" mode;
  **Log information description**
--1. A combination of Chinese characters, numbers, and uppercase and lowercase letters can be entered, and the number does not exceed 63.
--1. The format of insert variable:{variable address, data format}. e.g., {HDW100,UW2.1}.
++A combination of Chinese characters, numbers, and uppercase and lowercase letters can be entered, and the number does not exceed 63.
++The format of insert variable:{variable address, data format}. e.g., {HDW100,UW2.1}.
++
        The data format are as follows.
  (% class="table-bordered" %)
@@ -630,8 +630,7 @@
  |W|Single word
  |D|Double word
--(% start="3" %)
--1. Examples.
++Examples.
  * Unsigned decimal, BCD, 32-bit float and Signed decimal are as follows.
@@ -754,7 +754,7 @@
  [[https:~~/~~/drive.google.com/open?id=1qOiEDvo_1H1YqpoLDpS77dGaAFm8nrGq>>url:https://drive.google.com/open?id=1qOiEDvo_1H1YqpoLDpS77dGaAFm8nrGq]]
--= **{{id name="_Toc29015"/}}{{id name="_MessagePrompt"/}}Message Prompt** =
++= Message prompt =
  A message box is a window used to show some prompts or warnings to users. For example, the application process a task in the process of pop-up message box, suggesting that "U disk has been detected", then the customer can carry out data dump function.
@@ -821,12 +821,10 @@
  For example:
--~1. In 3000ig's Cloud, the monitoring tags upload to the Cloud in real time is limited to 100.
++* In 3000ig's Cloud, the monitoring tags upload to the Cloud in real time is limited to 100.
++* For 3000ig's Alarm, the Alarm records of word alarms and bit alarms upload to Cloud is limited to 20. (See [["Alarm">>http://docs.we-con.com.cn/wiki/pistudio/view/Helps/08.Basic%20Function/#HAlarm]] for details).
++* For 3000ig's Data record, the Data records upload to Cloud is limited to 50. (For details, please refer to [["Data Record">>http://docs.we-con.com.cn/wiki/pistudio/view/Helps/08.Basic%20Function/#HDataRecord]]).
--2. For 3000ig's Alarm, the Alarm records of word alarms and bit alarms upload to Cloud is limited to 20. (See [["Alarm">>http://docs.we-con.com.cn/wiki/pistudio/view/Helps/08.Basic%20Function/#HAlarm]] for details).
--
--3. For 3000ig's Data record, the Data records upload to Cloud is limited to 50. (For details, please refer to [["Data Record">>http://docs.we-con.com.cn/wiki/pistudio/view/Helps/08.Basic%20Function/#HDataRecord]]).
--
  **(2) Server Selection**
   **Server**: China, ASEAN, and Europe.

Changes for page 06 Data Tool

Summary

Details

Navigation

Table of Contents