Table of Contents
Last modified by Hunter on 2023/08/24 18:14
Table of Contents
Limitation of the Ethernet communication protocol
MODBUS RTU Slave (All function)/(All function OneBaseAddress)
MODBUS TCP Slave (All function)
EtherNet/IP(CompactLogix Series)
Introduction
This chapter contains information on configuring the communication between device and HMI.
General Procedure
During configuring communication in PIStudio. The following components and conditions is indeed at least.
- One PI HMI
- One connected controller (for example PLC)
- One Cable Wiring
User need to select controller protocol and set communication parameters in HMI project. Please note to set same communication parameter between controller and HMI project. After finishing project, user could download HMI project into HMI and connect HMI with controller by Cable Wiring. Thena simple automation system would be established.