Wiki source code of 03 Software

Version 24.1 by Jim on 2023/10/09 16:56
Show last authors
1 |=(% style="width: 179px;" %)**Software**|=(% style="width: 126px;" %)Version|=(% style="width: 119px;" %)Download|=(% style="width: 652px;" %)Description
2 |=(% style="width: 179px;" %)**PLC Editor2**|(% style="width:126px" %)2.3.247|(% style="width:119px" %)[[Link>>https://ftp.we-con.com.cn/Download/WIKI/LX6V%20PLC/Software/Wecon%20PLC%20Editor2%20setup%20Ver2.3.47.23090402.zip]]|(% style="width:652px" %)(((
3 Software Update:
4
5 * Added 6V pulse axis function;
6 Added 6V axis group function;
7 Added 6V function to read PLC CPU temperature and occupancy rate;
8 Added 5V PLC identification code function.
9 Added LX1V model.
10 )))
11
12
13 |=(% style="width: 179px;" %)**Software**|=(% style="width: 126px;" %)Version|=(% style="width: 119px;" %)Download|=(% style="width: 652px;" %)Description
14 |=(% style="width: 179px;" %)**PLC Editor2**|(% style="width:126px" %)2.1.232(Beta)|(% style="width:119px" %)[[Link>>https://ftp.we-con.com.cn/Download/WIKI/LX5V%20PLC/Software/Wecon%20PLC%20Editor2%20setup%20Ver2.3.2_1031_1900.zip]]|(% style="width:652px" %)(((
15 Software Update:
16
17 * Add the following instruction: 
18 Clock operation: TON, TONR, TOF, TP
19 Data processing: STDEV, DSTDEV
20 Other instructions: CRC_XMODEM, LRC
21 Floating-point operations: CHKFLT, DEMOD
22 Convenience instructions: MOVAVG, FOLAG, RCD
23 * Modify PWM command description
24 )))
25
26 |=(% style="width: 179px;" %)**Software**|=(% style="width: 126px;" %)Version|=(% style="width: 119px;" %)Download|=(% style="width: 652px;" %)Description
27 |=(% style="width: 179px;" %)**PLC Editor2**|(% style="width:126px" %)2.1.203|(% style="width:119px" %)[[Link>>https://ftp.we-con.com.cn/Download/Software/Wecon%20PLC%20Editor2%20setup%202.1.203_R1_0729.zip]]|(% style="width:652px" %)(((
28 Software Update:
29
30 * Add monitor edit function
31 * Add ethernet communication function(Model with -N)
32 * Add IP search function(Model with -N)
33 * Add PLCLINK function (Optimize and upgrade the previous 3V N:N protocol)
34 * Add batch search and replace function of soft components
35 * Add 3V software interface in 5V software
36 * Support COM1 user define protocol
37 * Add DSZR/BCC/MAX/MIN instruction.
38 * New 5V PLC firmware: V2.013 Update:
39 * Add multiple origin regression instruction functions of DSZR;
40 * Support COM1 user define protocol;
41 * Add PLCLINK function;
42 * Add acceleration and deceleration (trapezoidal and S-shaped) time division function;
43 * Add spiral interpolation instruction;
44 * Add the hardware configuration table function.
45 * Add BCC/MAX/MIN instruction;
46 * Add the function of direction delay of interpolation instruction;
47 * Add monitor edit function.
48 )))