Wiki source code of 1 VM Series Manual V1.2

Last modified by Mora Zhou on 2023/12/28 10:44

version	line-number	content
7.2	1	(% class="box infomessage" %)
	2	(((
9.1	3	This is VM series V1.2. S/N on the inverter starts from "X0".
7.2	4	)))
	5
13.1	6	= Preface =
1.1	7
	8	Thank you for choosing WECON VM Series AC Drive.
	9
	10	This user manual introduces the technical specifications, installation instructions, functions and performance of VM Series AC Drive properly. Please read this user manual carefully before carrying out works such as installation, commissioning, maintenance, etc.
	11
	12	You are specially warned to read and understand safety precaution items of this manual before using this product, and to ensure that relevant electrical installation testers’ professional qualification shall be in line with the provisions of the labor supervision department, and the electrical and environmental conditions for product use shall be in conformity with relevant national standards.
	13
	14	Be sure to verify that the wiring is correct before powering on the product. Before starting the product, it is necessary to debug to ensure correct motor rotating direction.
	15
14.1	16	= Safety precautions =
1.1	17
	18	■ Warning sign
	19
	20	[[image:WECON VM 英文 V01_html_f697a083b5da7fc8.png]] DANGER: Indicates that failure to comply with the notice will result in severe personal injure or even death.
	21
	22	[[image:WECON VM 英文 V01_html_b36792972403c101.png]] WARNING: Indicates that failure to comply with the notice will result in moderate personal injury, property damage or equipment damage.
	23
5.1	24	(% class="warning" %)\|WARNING
1.1	25	\|(((
	26	◎Do not install or operate any AC Drive that is damaged or with missing parts. Failing to follow this rule can result in facility damage or severe injury.
	27
	28	◎When installing or handling the AC Drive, please hold the bottom of the product rather than the case only, to prevent its falling and being damaged.
	29
	30	◎Install the AC Drive on nonflammable material like metal, and keep away from flammable or explosive object, heat source, and similar environment. Otherwise, fire may be caused.
	31
	32	◎When AC Drive is installed inside an electrical cabinet or other kind of enclosure, please install fans or other cooling devices, and keep ventilation well enough to ensure the enclosure temperature below 40℃, or the AC Drive may be damaged due to extreme high temperature.
	33
	34	◎Before wiring, ensure the AC Drive rated input voltage and phases are compatible with the input power source, or fire or personal injury may be caused.
	35
	36	◎Never connect the AC power supply to output terminals U, V and W. Otherwise, the AC Drive will be damaged and the warranty is invalid.
	37
	38	◎Never carry out withstand voltage test to the AC Drive, for example by a megohmmeter. Otherwise, it may cause damage to the AC Drive.
	39
	40	◎The connecting cable of the main circuit terminal should use an insulating sleeve.
	41
	42	◎When the cable length between the AC Drive and the motor exceeds 50 meters, an output reactor is recommended to be used.
	43
	44	◎Do not use a circuit breaker to control the start and stop of the AC Drive. Otherwise, the AC Drive may be damaged.
	45
	46	◎Since the AC Drive makes the motor running speed from low to high in a short time, please confirm that the motor and equipment are in the allowed running range before running.
	47
	48	◎Do not touch due to high temperature of the heat sink and braking resistor.
	49
	50	◎The factory parameters of the AC Drive can meet the requirments of most equipment operation. Under normal circumstances, please do not modify the AC Drive parameters at will. Even if there is some special applications need to change the AC Drive parameters, only necessary parameters could be changed. Otherwise, AC Drive damage may be caused.
	51
	52	◎The PCB board has a CMOS integrated circuit. Do not touch it with your hands, otherwise, static electricity will damage the PCB board.
	53	)))
	54
5.1	55	(% class="warning" %)\|DANGER
1.1	56	\|(((
	57	◎Wiring must be completed by qualified professional electricians, otherwise, there may be electric shock or damage to the AC Drive.
	58
	59	◎The power must be disconnected during wiring; otherwise, it may cause electric shock or fire.
	60
	61	◎The grounding terminal should be effectively grounded; otherwise, the outer casing of the AC Drive may be energized.
	62
	63	◎Do not touch the main circuit terminals, otherwise, it may cause electric shock.
	64
	65	◎Terminals for brake resistor are and PB. Do not wire to other terminals, otherwise, fire may be caused.
	66
	67	◎It is only allowed to power on the AC Drive after the wiring is finished and its cover is reinstalled. It is strictly prohibited to remove the cover of AC Drive while power is on. Otherwise, it may cause electric shock.
	68
	69	◎Before programming the AC Drive with fault auto reset or restart option after power off, the mechanical device need to be implemented with safety protection measures first. Otherwise, personal injury will be caused.
	70
	71	◎“ STOP/RESET” key may become invalid as a result of some function setting. It is recommended to install an independent emergency circuit breaker for the AC Drive control system, otherwise, or personal injury may be caused.
	72
	73	◎When the power is on, there may be electricity in the AC Drive’s terminals even if it is in stop mode. Do not touch U, V, W terminals and motor connection terminals, or electrical shock may be caused.
	74
	75	◎Never touch the AC Drive connection terminals when power is on. Otherwise, it may cause an electrical shock.
	76
	77	◎Only qualified electricians can be authorized to do the jobs of maintenance, checking, or parts replacement.
	78
	79	◎After the power supply is OFF, make sure the charge LED is OFF and the residual voltage does not exist, or wait for at least 10 minutes before carrying out maintenance or inspection. Otherwise, damage or injury may be caused.
	80
	81	◎Modification to the AC Drive without permission is strictly prohibited, otherwise, severe injury may be caused. Arbitrarily modification of AC Drive will result in service warranty invalid.
	82	)))
	83
14.1	84	= Product information =
1.1	85
5.1	86	== Technical specifications ==
1.1	87
5.1	88	\|=(% colspan="2" %)Item\|=Specifications
1.1	89	\|(% rowspan="7" %)Control features\|Control mode\|V/F control
	90	\|Startup torque\|0.5Hz/100%
7.2	91	\|Speed range\|1: 50
1.1	92	\|Speed stability accuracy\|±1%
7.2	93	\|Carrier frequency\|1kHz~~6kHz；
1.1	94	\|Overload capacity\|60s for 150% of the rated current, 1s for 180% of the rated current.
7.2	95	\|Torque boost\|0.0%~~30.0%
	96	\|(% rowspan="4" %)Input and Output\|Input voltage range\|220V/380V; fluctuation range: ±15%
	97	\|Input frequency range\|50/60Hz；fluctuation range: ±5%
1.1	98	\|Output voltage range\|0-input voltage; the error is less than 5%
7.2	99	\|Output frequency range\|0~~400Hz
1.1	100	\|(% rowspan="5" %)Basic function\|Running command source\|Three command source：keypad; control terminals; serial communication port.
	101	\|Frequency source\|such as digital setting, analog voltage setting, analog current setting, serial communication port setting.
	102	\|DC braking\|(((
7.2	103	Braking time: 0.0s~~50.0s;
1.1	104
7.2	105	Braking action current value: 0.0%~~100.0%
1.1	106	)))
	107	\|Simple PLC/Multiple speeds\|It implements up to 8 speeds via the simple PLC function or combination of DI terminal states.
	108	\|Protection mode\|Motor short-circuit detection at power-on, input/output phase loss protection, overcurrent protection, overvoltage protection, undervoltage protection, overheat protection, overload protection and so on.
	109	\|(% rowspan="2" %)Display and Key operation\|LED display\|It displays the parameters.
	110	\|Parameters locking function\|It can lock the parameters to prevent malfunction.
	111	\|(% rowspan="6" %)Environment\|Installation location\|Indoor, free from direct sunlight, dust, corrosive gas, combustible gas, oil smoke, vapour, drip or salt.
	112	\|Altitude\|Lower than 1000m. When it is higher than 1000m, for every 100m, it needs to reduce power by 1%, and the maximum altitude is 3000m.
7.2	113	\|Ambient temperature\|-10℃~~50℃. When it is higher than 40℃, for every 1℃, it needs to reduce power by 1%, and the maximum ambient temperature is 50℃
1.1	114	\|Humidity\|≤95%RH, without condensing
	115	\|Vibration\|Less than 5.9m/s2 (0.6g)
	116	\|Storage temperature\|-25℃～+60℃
	117
	118	Table 1-1-1 Technical specification shee
	119
5.1	120	== Product nameplate ==
1.1	121
7.2	122	(% style="text-align:center" %)
	123	(((
	124	(% class="wikigeneratedid img-thumbnail" style="display:inline-block" %)
	125	[[Figure 1-2-1 Product nameplate>>image:WECON VM 英文 V01_html_5a52ff18546c8417.png\|\|id="IWECONVMA082F16587A0V01_html_5a52ff18546c8417.png"]]
	126	)))
1.1	127
	128
5.1	129	== Model description ==
1.1	130
	131	__VM__ – __2__ __S__ __1R5GB__
	132
	133	① ② ③ ④
	134
7.2	135	\|=Field\|=No.\|=Identification\|=Description
1.1	136	\|Product series\|①\|Product series\|VM series
7.2	137	\|Voltage grade\|②\|Voltage grade\|2: 220VAC; 4: 380VAC
	138	\|The input power\|③\|Power phase identification\|S: single; T: three-phase
1.1	139	\|Rated power\|④\|Power range\|1R5-1.5kW，R is the decimal point
	140
	141	Table 1-3-1 VM series model field comment
	142
5.1	143	== Product model ==
1.1	144
7.2	145	\|=(% rowspan="2" scope="row" %)AC Drive Model\|=Rated power\|=Power capacity\|=Input current\|=(% style="width: 173px;" %)Output current\|=(% colspan="2" style="width: 199px;" %)Motor G/P
	146	\|=kW\|=kVA\|=A\|=(% style="width: 173px;" %)A\|=(% style="width: 128px;" %)kW\|=HP
	147	\|=VM-2SR75\|0.75\|1.5\|8.2\|(% style="width:173px" %)4\|(% style="width:128px" %)0.75\|1
	148	\|=VM-2S1R5\|1.5\|3\|14.2\|(% style="width:173px" %)7\|(% style="width:128px" %)1.5\|2
	149	\|=VM-2S2R2\|2.2\|4\|23\|(% style="width:173px" %)9.6\|(% style="width:128px" %)2.2\|3
	150	\|=VM-4T2R2\|2.2\|4\|5.8\|(% style="width:173px" %)5.1\|(% style="width:128px" %)2.2\|3
	151	\|=VM-4T004\|4\|5.9\|10.5\|(% style="width:173px" %)9\|(% style="width:128px" %)4/\|5.5
	152	\|=VM-4T5R5\|5.5\|8.9\|14.6\|(% style="width:173px" %)13\|(% style="width:128px" %)5.5\|7.5
	153	\|=VM-4T7R5\|7.5\|11\|20.5\|(% style="width:173px" %)17\|(% style="width:128px" %)7.5\|10
	154	\|=VM-4T011*\|11\|17\|26\|(% style="width:173px" %)25\|(% style="width:128px" %)11\|15
	155	\|=VM-4T015*\|15\|21\|35\|(% style="width:173px" %)32\|(% style="width:128px" %)15\|20
1.1	156
	157	Table 1-4-1 Product model table
	158
7.2	159	(% class="box infomessage" %)
	160	(((
1.1	161	*:In development
7.2	162	)))
1.1	163
14.1	164	= Installation =
1.1	165
5.1	166	== Overall structural drawing ==
1.1	167
5.1	168	(% class="wikigeneratedid" %)
	169	unit: mm
1.1	170
7.2	171	(% style="text-align:center" %)
	172	(((
	173	(% class="wikigeneratedid img-thumbnail" style="display:inline-block" %)
	174	[[Figure 2-1-1 Outline dimension diagram>>image:1624240220324-243.png\|\|id="I1624240220324-243.png"]]
	175	)))
1.1	176
	177
7.2	178	(% style="width:1271.22px" %)
	179	\|=(% rowspan="2" scope="row" style="width: 267px;" %)AC Drive Model\|=(% colspan="3" style="width: 384px;" %)Overall Dimensions\|=(% colspan="2" style="width: 294px;" %)Mounting Hole\|=(% style="width: 259px;" %)Mounting Hole Diameter
	180	\|=(% style="width: 118px;" %)H\|=(% style="width: 120px;" %)W\|=(% style="width: 145px;" %)D\|=(% style="width: 147px;" %)H1\|=(% style="width: 147px;" %)W1\|=(% style="width: 259px;" %)d
	181	\|=(% style="width: 267px;" %)VM-2SR75\|(% rowspan="2" style="width:118px" %)134\|(% rowspan="2" style="width:120px" %)69\|(% rowspan="2" style="width:145px" %)104\|(% rowspan="2" style="width:147px" %)123\|(% rowspan="2" style="width:147px" %)55\|(% rowspan="2" style="width:259px" %)5
	182	\|=(% style="width: 267px;" %)VM-2S1R5
	183	\|=(% style="width: 267px;" %)VM-2S2R2\|(% rowspan="2" style="width:118px" %)142\|(% rowspan="2" style="width:120px" %)72\|(% rowspan="2" style="width:145px" %)116\|(% rowspan="2" style="width:147px" %)130\|(% rowspan="2" style="width:147px" %)59\|(% rowspan="2" style="width:259px" %)5
	184	\|=(% style="width: 267px;" %)VM-4T2R2
	185	\|=(% style="width: 267px;" %)VM-4T004\|(% style="width:118px" %)196\|(% style="width:120px" %)95\|(% style="width:145px" %)132\|(% style="width:147px" %)179\|(% style="width:147px" %)79\|(% style="width:259px" %)5.5
	186	\|=(% style="width: 267px;" %)VM-4T5R5\|(% rowspan="2" style="width:118px" %)225\|(% rowspan="2" style="width:120px" %)115\|(% rowspan="2" style="width:145px" %)154\|(% rowspan="2" style="width:147px" %)208\|(% rowspan="2" style="width:147px" %)99\|(% rowspan="2" style="width:259px" %)5.5
	187	\|=(% style="width: 267px;" %)VM-4T7R5
	188	\|=(% style="width: 267px;" %)VM-4T011\|(% style="width:118px" %)-\|(% style="width:120px" %)-\|(% style="width:145px" %)-\|(% style="width:147px" %)-\|(% style="width:147px" %)-\|(% style="width:259px" %)-
	189	\|=(% style="width: 267px;" %)VM-4T015\|(% style="width:118px" %)-\|(% style="width:120px" %)-\|(% style="width:145px" %)-\|(% style="width:147px" %)-\|(% style="width:147px" %)-\|(% style="width:259px" %)-
1.1	190
	191	Table 2-1-1 outline dimension
	192
5.1	193	== Terminal connection ==
1.1	194
7.2	195	(% style="text-align:center" %)
	196	(((
	197	(% class="wikigeneratedid img-thumbnail" style="display:inline-block" %)
	198	[[Figure 2-2-1 Terminal connection>>image:1624240272484-903.png\|\|id="I1624240272484-903.png"]]
	199	)))
1.1	200
	201
5.1	202	Main circuit connection
1.1	203
7.2	204	\|=(% scope="row" %)Terminal mark\|=Name\|=Description
	205	\|=R、S、T\|Power supply input terminals\|Connect to the AC power supply
	206	\|=U、V、W\|AC drive output terminals\|Connect the three-phase motor.
	207	\|=[[image:WECON VM 英文 V01_html_2b5dc89a424d22e6.png\|\|height="22" width="23"]]\|Grounding terminal\|Must be grounded.
1.1	208
	209	Table 2-2-1 Main circuit terminals and function
	210
5.1	211	Control circuit connection
1.1	212
7.2	213	\|=Category\|=Terminal symbol\|=Terminal name\|=Function description
1.1	214	\|(% rowspan="2" %)Power supply\|+10V-GND\|＋10V power supply\|(((
	215	Provide +10V power supply to external unit.
	216
	217	Maximum output current: 20 mA.
	218	)))
	219	\|+24V-COM\|＋24V power supply\|Provide +24V power supply to external unit.
	220	\|Analog input\|AI-GND\|Analog input terminal 1\|Input voltage range: 0-10V
	221	\|(% rowspan="4" %)Digital input\|DI1\|Digital input 1\|(% rowspan="4" %)
	222	\|DI2\|Digital input 2
	223	\|DI3\|Digital input 3
	224	\|DI4\|Digital input 4
	225	\|Relay output\|RA-RC\|NO terminal\|NO terminal
	226	\|(% colspan="2" rowspan="2" %)Communication port and socket\|S+\|RS485 signal positive terminal
	227	\|S-\|RS485 signal negative terminal
	228
	229	Table 2-2-2 Control terminal instruction
	230
14.1	231	= Display and operation =
1.1	232
5.1	233	== Keypad ==
1.1	234
	235	You can modify the parameters, monitor the working status and start or stop the AC Drive by operating the keypad, as shown in the following figure.
	236
7.2	237	(% style="text-align:center" %)
	238	(((
14.1	239	(% class="wikigeneratedid img-thumbnail" style="display:inline-block; width:280px;" %)
7.2	240	[[Figure 3-1-1 Keypad diagram>>image:WECON VM 英文 V01_html_53c6de9f2105008c.png\|\|height="302" id="IWECONVMA082F16587A0V01_html_53c6de9f2105008c.png" width="280"]]
	241	)))
1.1	242
	243
5.1	244	== Description of indicators and keys ==
1.1	245
7.2	246	\|=(% scope="row" %)Item\|=(% style="width: 213px;" %)Name\|=(% style="width: 865px;" %)Function
	247	\|=Indicator\|(% style="width:213px" %)Status\|(% style="width:865px" %)(((
	248	* RUN: ON/Running; OFF/Stop.
	249	* REMOTE: ON/Terminal control; Blinking/Communication; OFF/keypad control.
	250	* FWD/REV: ON/Forward rotation; OFF/Reverse rotation; Blinking/Forward and reverse switching.
	251	* ALARM: Blinking /Fault state.
1.1	252	)))
7.2	253	\|=(% rowspan="6" %)Keys\|(% style="width:213px" %)(((
	254	PRG (Programming)
	255	)))\|(% style="width:865px" %)Enter or exit the first menu.
	256	\|(% scope="row" style="width:213px" %)ENT (Confirm)\|(% style="width:865px" %)Enter the menu interfaces and confirm the parameter setting.
	257	\|(% scope="row" style="width:213px" %)△（Increment）\|(% style="width:865px" %)Increase date or function code.
	258	\|(% scope="row" style="width:213px" %)▽（Decrement）\|(% style="width:865px" %)Decrease data or function code.
	259	\|(% scope="row" style="width:213px" %)<<（Shift）\|(% style="width:865px" %)Select the displayed parameters in the stop or running state and select the digit to be modified when modifying parameters.
	260	\|(% scope="row" style="width:213px" %)RUN/STOP\|(% style="width:865px" %)(((
1.1	261	Control drive start and stop in keypad control mode.
	262
	263	Perform the reset operation when it is in the fault state.
	264	)))
7.2	265	\|=Potentiometer\|(% style="width:213px" %)Resistance potentiometer\|(% style="width:865px" %)Frequency adjustment in keyboard operation mode
1.1	266
	267	Table 3-2-1 Description of Indicators and key
	268
14.1	269	= Parameter function =
1.1	270
7.2	271	* “○”: the parameter can be modified in both standby and operating state；
	272	* “●”: the parameter can’t be modified in operating state；
	273	* “◎”:the parameter is the actual detected and recorded value which can’t be modified；
1.1	274
7.2	275	(% class="box infomessage" %)
	276	(((
	277	Note: the communication address is hexadecimal.
	278	)))
1.1	279
5.1	280	== Functional parameter ==
1.1	281
7.3	282	\|=(% scope="row" style="width: 97px;" %)Parameter\|=(% style="width: 320px;" %)Name\|=(% style="width: 428px;" %)Setting Range\|=(% style="width: 190px;" %)Default\|=(% style="width: 80px;" %)Property\|=(% style="width: 87px;" %)Address
	283	\|=(% style="width: 97px;" %)F0.00\|(% style="width:320px" %)Reserved\|(% style="width:428px" %)Reserved\|(% style="width:190px" %)0\|(% style="width:80px" %)●\|(% style="width:87px" %)0000
7.2	284	\|=(% style="width: 97px;" %)F0.01\|(% style="width:320px" %)Command source selection\|(% style="width:428px" %)(((
	285	* 0：Operation panel control（LED off）
	286	* 1：Terminal control（LED on）
	287	* 2：Communication LED (LED blinking）
7.3	288	)))\|(% style="width:190px" %)0\|(% style="width:80px" %)●\|(% style="width:87px" %)0001
7.2	289	\|=(% style="width: 97px;" %)F0.02\|(% style="width:320px" %)Setting main frequency source X\|(% style="width:428px" %)(((
	290	* 0：Digital setting (non-retentive at power failure)
	291	* 1：Digital setting (retentive at power failure)
	292	* 2：Keypad Knob
	293	* 3：AI
	294	* 4：Multi-stage speed
	295	* 5：Simple PLC
	296	* 6：Communication
7.3	297	)))\|(% style="width:190px" %)2\|(% style="width:80px" %)●\|(% style="width:87px" %)0002
	298	\|=(% style="width: 97px;" %)F0.03\|(% style="width:320px" %)Keypad setting frequency\|(% style="width:428px" %)0.00Hz～F0.05\|(% style="width:190px" %)50.0Hz\|(% style="width:80px" %)○\|(% style="width:87px" %)0003
7.2	299	\|=(% style="width: 97px;" %)F0.04\|(% style="width:320px" %)Running direction selection\|(% style="width:428px" %)(((
	300	* 0：Forward
	301	* 1：Reverse
7.3	302	)))\|(% style="width:190px" %)0\|(% style="width:80px" %)○\|(% style="width:87px" %)0004
	303	\|=(% style="width: 97px;" %)F0.05\|(% style="width:320px" %)Maximum Output Frequency\|(% style="width:428px" %)50.00Hz～400.00Hz\|(% style="width:190px" %)50.0Hz\|(% style="width:80px" %)●\|(% style="width:87px" %)0005
	304	\|=(% style="width: 97px;" %)F0.06\|(% style="width:320px" %)Upper Limit of Frequency\|(% style="width:428px" %)F0.07～F0.05\|(% style="width:190px" %)50.0Hz\|(% style="width:80px" %)○\|(% style="width:87px" %)0006
	305	\|=(% style="width: 97px;" %)F0.07\|(% style="width:320px" %)Lower Limit of Frequency\|(% style="width:428px" %)0.00Hz～F0.06\|(% style="width:190px" %)0.0Hz\|(% style="width:80px" %)○\|(% style="width:87px" %)0007
7.2	306	\|=(% style="width: 97px;" %)F0.08\|(% style="width:320px" %)The option of frequency lower limit\|(% style="width:428px" %)(((
	307	* 0：Running at frequency lower limit
	308	* 1：Stop
	309	* 2：Standby
7.3	310	)))\|(% style="width:190px" %)0\|(% style="width:80px" %)○\|(% style="width:87px" %)0008
	311	\|=(% style="width: 97px;" %)F0.09\|(% style="width:320px" %)Carrier Frequency\|(% style="width:428px" %)1kHz～6.0kHz\|(% style="width:190px" %)6.0kHz\|(% style="width:80px" %)●\|(% style="width:87px" %)0009
	312	\|=(% style="width: 97px;" %)F0.10\|(% style="width:320px" %)Acceleration Time 1\|(% style="width:428px" %)0.0s～100.0s\|(% style="width:190px" %)10.0s\|(% style="width:80px" %)○\|(% style="width:87px" %)000A
	313	\|=(% style="width: 97px;" %)F0.11\|(% style="width:320px" %)Deceleration Time 1\|(% style="width:428px" %)0.0s～100.0s\|(% style="width:190px" %)10.0s\|(% style="width:80px" %)○\|(% style="width:87px" %)000B
7.2	314	\|=(% style="width: 97px;" %)F0.12\|(% style="width:320px" %)Stop Mode\|(% style="width:428px" %)(((
	315	* 0：Decelerate to stop
	316	* 1：Free stop
7.3	317	)))\|(% style="width:190px" %)0\|(% style="width:80px" %)○\|(% style="width:87px" %)000C
7.2	318	\|=(% style="width: 97px;" %)F0.13\|(% style="width:320px" %)Retentive of digital setting frequency\|(% style="width:428px" %)(((
	319	* 0：No retentive
	320	* 1：retentive
7.3	321	)))\|(% style="width:190px" %)1\|(% style="width:80px" %)●\|(% style="width:87px" %)000D
7.2	322	\|=(% style="width: 97px;" %)F0.14\|(% style="width:320px" %)Fan operating mode\|(% style="width:428px" %)(((
	323	* 0：Run when motor is running
	324	* 1：Keep run when power on
7.3	325	)))\|(% style="width:190px" %)0\|(% style="width:80px" %)○\|(% style="width:87px" %)000E
7.2	326	\|=(% style="width: 97px;" %)F0.15\|(% style="width:320px" %)AI1 Input Option\|(% style="width:428px" %)(((
	327	* 0: 0-10V
	328	* 1: 4-20mA
	329	* 2: 0-20mA
	330	* 3: 0-5V
	331	* 4: 0.5-4.5V
7.3	332	)))\|(% style="width:190px" %)0\|(% style="width:80px" %)○\|(% style="width:87px" %)000F
7.2	333	\|=(% style="width: 97px;" %)F1.00\|(% style="width:320px" %)Default Setting Restoring\|(% style="width:428px" %)(((
	334	* 0: No Operation
	335	* 1: Restore to factory default setting (not including F2 parameters)
	336	* 2: Clear error records
7.3	337	)))\|(% style="width:190px" %)0\|(% style="width:80px" %)●\|(% style="width:87px" %)0100
7.2	338	\|=(% style="width: 97px;" %)F1.01\|(% style="width:320px" %)Parameters Lockup\|(% style="width:428px" %)(((
	339	* 0: Invalid
	340	* 1: Valid
7.3	341	)))\|(% style="width:190px" %)0\|(% style="width:80px" %)○\|(% style="width:87px" %)0101
	342	\|=(% style="width: 97px;" %)F1.02\|(% style="width:320px" %)User Password\|(% style="width:428px" %)0~~65000\|(% style="width:190px" %)0\|(% style="width:80px" %)○\|(% style="width:87px" %)0102
	343	\|=(% style="width: 97px;" %)F2.00\|(% style="width:320px" %)Motor Rated Power\|(% style="width:428px" %)0.1kW~~2.2kW\|(% style="width:190px" %)Determined by Drive Model\|(% style="width:80px" %)●\|(% style="width:87px" %)0200
	344	\|=(% style="width: 97px;" %)F2.01\|(% style="width:320px" %)Motor Rated Voltage\|(% style="width:428px" %)0~~380V\|(% style="width:190px" %)Determined by Drive Model\|(% style="width:80px" %)●\|(% style="width:87px" %)0201
	345	\|=(% style="width: 97px;" %)F2.02\|(% style="width:320px" %)Motor Rated Frequency\|(% style="width:428px" %)0~~ F0.05\|(% style="width:190px" %)Determined by Drive Model\|(% style="width:80px" %)●\|(% style="width:87px" %)0202
	346	\|=(% style="width: 97px;" %)F2.03\|(% style="width:320px" %)Motor Rated Current\|(% style="width:428px" %)1.00~~10.00\|(% style="width:190px" %)Determined by Drive Model\|(% style="width:80px" %)●\|(% style="width:87px" %)0203
7.2	347	\|=(% style="width: 97px;" %)F2.05\|(% style="width:320px" %)Type of Motor\|(% style="width:428px" %)(((
12.1	348	* 0: Three Phase
	349	* 1: Single Phase
7.3	350	)))\|(% style="width:190px" %)0\|(% style="width:80px" %)●\|(% style="width:87px" %)0205
	351	\|=(% style="width: 97px;" %)F2.06\|(% style="width:320px" %)Single-phase motor main and auxiliary winding turns ratio\|(% style="width:428px" %)10~~200\|(% style="width:190px" %)80\|(% style="width:80px" %)○\|(% style="width:87px" %)0206
	352	\|=(% style="width: 97px;" %)F2.07\|(% style="width:320px" %)Single-phase motor current correction factor\|(% style="width:428px" %)50~~200\|(% style="width:190px" %)130\|(% style="width:80px" %)○\|(% style="width:87px" %)0207
	353	\|=(% style="width: 97px;" %)F4.00\|(% style="width:320px" %)Torque Boost\|(% style="width:428px" %)0.0%~~30.0%\|(% style="width:190px" %)4.0%\|(% style="width:80px" %)○\|(% style="width:87px" %)0400
	354	\|=(% style="width: 97px;" %)F4.01\|(% style="width:320px" %)Cut-off frequency of torque boost\|(% style="width:428px" %)0.00Hz～F0.05\|(% style="width:190px" %)50.00Hz\|(% style="width:80px" %)●\|(% style="width:87px" %)0401
	355	\|=(% style="width: 97px;" %)F4.02\|(% style="width:320px" %)Trigging frequency of DC braking at stop\|(% style="width:428px" %)0.00Hz～F0.05\|(% style="width:190px" %)0.00Hz\|(% style="width:80px" %)○\|(% style="width:87px" %)0402
	356	\|=(% style="width: 97px;" %)F4.03\|(% style="width:320px" %)Delay time of DC braking at stop\|(% style="width:428px" %)0.0s～50.0s\|(% style="width:190px" %)0.0s\|(% style="width:80px" %)○\|(% style="width:87px" %)0403
	357	\|=(% style="width: 97px;" %)F4.04\|(% style="width:320px" %)The current of DC braking at stop\|(% style="width:428px" %)0～100%\|(% style="width:190px" %)0\|(% style="width:80px" %)○\|(% style="width:87px" %)0404
	358	\|=(% style="width: 97px;" %)F4.05\|(% style="width:320px" %)The time of DC braking at stop\|(% style="width:428px" %)0.0s～50.0s\|(% style="width:190px" %)0.0s\|(% style="width:80px" %)○\|(% style="width:87px" %)0405
7.2	359	\|=(% style="width: 97px;" %)F4.06\|(% style="width:320px" %)Automatic adjustment of carrier Frequency\|(% style="width:428px" %)(((
	360	* 0: Invalid;
	361	* 1: Valid
7.3	362	)))\|(% style="width:190px" %)0\|(% style="width:80px" %)●\|(% style="width:87px" %)0406
7.2	363	\|=(% style="width: 97px;" %)F4.07\|(% style="width:320px" %)0 frequency output option\|(% style="width:428px" %)(((
	364	* 0: Valid;
	365	* 1: Invalid
7.3	366	)))\|(% style="width:190px" %)1\|(% style="width:80px" %)●\|(% style="width:87px" %)0407
7.2	367	\|=(% style="width: 97px;" %)F5.00\|(% style="width:320px" %)DI1 terminal function selection\|(% rowspan="4" style="width:428px" %)(((
	368	* 0: No function
	369	* 1: Forward running (FWD)
	370	* 2: Reverse running (REV)
	371	* 3: Three-wire operation control
	372	* 4: Forward point movement (FJOG)
	373	* 5: Reverse point movement (RJOG)
	374	* 6: Error Reset
	375	* 7: Terminal UP
	376	* 8: Terminal Down
	377	* 9: UP/DOWN Setting Clear
	378	* 10: External error input(Normally Open)
	379	* 11: PLC Status reset
	380	* 12: Multi stage speed terminal 1
	381	* 13: Multi stage speed terminal 2
	382	* 14: Reserved
7.3	383	)))\|(% style="width:190px" %)1\|(% style="width:80px" %)●\|(% style="width:87px" %)0500
	384	\|=(% style="width: 97px;" %)F5.01\|(% style="width:320px" %)DI2 terminal function selection\|(% style="width:190px" %)2\|(% style="width:80px" %)●\|(% style="width:87px" %)0501
	385	\|=(% style="width: 97px;" %)F5.02\|(% style="width:320px" %)DI3 terminal function selection\|(% style="width:190px" %)6\|(% style="width:80px" %)●\|(% style="width:87px" %)0502
	386	\|=(% style="width: 97px;" %)F5.03\|(% style="width:320px" %)DI4 terminal function selection\|(% style="width:190px" %)0\|(% style="width:80px" %)●\|(% style="width:87px" %)0503
	387	\|=(% style="width: 97px;" %)F5.04\|(% style="width:320px" %)DI filter time\|(% style="width:428px" %)0.000s～1.000s\|(% style="width:190px" %)0.010s\|(% style="width:80px" %)○\|(% style="width:87px" %)0504
7.2	388	\|=(% style="width: 97px;" %)F5.05\|(% style="width:320px" %)Terminal Command Option\|(% style="width:428px" %)(((
	389	* 0: Two-line mode 1
	390	* 1: Two-line mode 2
	391	* 2: Three-line mode 1
	392	* 3: Three-line mode 2
7.3	393	)))\|(% style="width:190px" %)0\|(% style="width:80px" %)●\|(% style="width:87px" %)0505
	394	\|=(% style="width: 97px;" %)F5.06\|(% style="width:320px" %)UP/DOWN change rate range\|(% style="width:428px" %)0.01Hz～50.00Hz\|(% style="width:190px" %)0.50Hz\|(% style="width:80px" %)○\|(% style="width:87px" %)0506
	395	\|=(% style="width: 97px;" %)F5.07\|(% style="width:320px" %)AI minimum input\|(% style="width:428px" %)0.00V～F5.09\|(% style="width:190px" %)0.00V\|(% style="width:80px" %)○\|(% style="width:87px" %)0507
	396	\|=(% style="width: 97px;" %)F5.08\|(% style="width:320px" %)Percentage rate of AI minimum input\|(% style="width:428px" %)-100.0%～+100.0%\|(% style="width:190px" %)0.0%\|(% style="width:80px" %)○\|(% style="width:87px" %)0508
	397	\|=(% style="width: 97px;" %)F5.09\|(% style="width:320px" %)AI maximum input\|(% style="width:428px" %)F5.07～+10.00V\|(% style="width:190px" %)10.00V\|(% style="width:80px" %)○\|(% style="width:87px" %)0509
	398	\|=(% style="width: 97px;" %)F5.10\|(% style="width:320px" %)Percentage rate of AI maximum input\|(% style="width:428px" %)-100.0%～+100.0%\|(% style="width:190px" %)100.0%\|(% style="width:80px" %)○\|(% style="width:87px" %)050A
	399	\|=(% style="width: 97px;" %)F5.11\|(% style="width:320px" %)AI filter time\|(% style="width:428px" %)0.00s～10.00s\|(% style="width:190px" %)0.10s\|(% style="width:80px" %)○\|(% style="width:87px" %)050B
	400	\|=(% style="width: 97px;" %)F5.12\|(% style="width:320px" %)DI1 Enable Delay Time\|(% style="width:428px" %)0.0s～100.0s\|(% style="width:190px" %)0.0s\|(% style="width:80px" %)○\|(% style="width:87px" %)050C
	401	\|=(% style="width: 97px;" %)F5.13\|(% style="width:320px" %)DI2 Enable Delay Time\|(% style="width:428px" %)0.0s～100.0s\|(% style="width:190px" %)0.0s\|(% style="width:80px" %)○\|(% style="width:87px" %)050D
	402	\|=(% style="width: 97px;" %)F5.14\|(% style="width:320px" %)DI1 Disable Delay Time\|(% style="width:428px" %)0.0s～100.0s\|(% style="width:190px" %)0.0s\|(% style="width:80px" %)○\|(% style="width:87px" %)050E
	403	\|=(% style="width: 97px;" %)F5.15\|(% style="width:320px" %)DI2 Disable Delay Time\|(% style="width:428px" %)0.0s～100.0s\|(% style="width:190px" %)0.0s\|(% style="width:80px" %)○\|(% style="width:87px" %)050F
7.2	404	\|=(% style="width: 97px;" %)F5.16\|(% style="width:320px" %)AI Input Digital Functional Option\|(% style="width:428px" %)(((
	405	* 0: No function
	406	* 1: Forward running (FWD)
	407	* 2: Reverse running (REV)
	408	* 3: Three-wire operation control
	409	* 4: Forward point movement (FJOG)
	410	* 5: Reverse point movement (RJOG)
	411	* 6: Error Reset
	412	* 7: Terminal UP
	413	* 8: Terminal Down
	414	* 9: UP/DOWN Setting Clear
	415	* 10: External error input(Normally Open)
	416	* 11: PLC Status reset
	417	* 12: Multi stage speed terminal 1
	418	* 13: Multi stage speed terminal 2
	419	* 14: Reserved
7.3	420	)))\|(% style="width:190px" %)0\|(% style="width:80px" %)●\|(% style="width:87px" %)0510
7.2	421	\|=(% style="width: 97px;" %)F5.17\|(% style="width:320px" %)AI Input Valid Level Option\|(% style="width:428px" %)(((
	422	* 0: Low Level Valid
	423	* 1: High Level Valid
7.3	424	)))\|(% style="width:190px" %)1\|(% style="width:80px" %)○\|(% style="width:87px" %)0511
7.2	425	\|=(% style="width: 97px;" %)F6.00\|(% style="width:320px" %)Relay Output Option\|(% style="width:428px" %)(((
	426	* 0: No Output
	427	* 1: VFD Running
	428	* 2: Error Output(Output is valid only after VFD stops)
	429	* 3: Ready for Running
	430	* 4: Communication Setting
	431	* 5: User Defined Output
7.3	432	)))\|(% style="width:190px" %)0\|(% style="width:80px" %)○\|(% style="width:87px" %)0600
	433	\|=(% style="width: 97px;" %)F6.01\|(% style="width:320px" %)Relay1 Closed Delay Time\|(% style="width:428px" %)0.0s～100.0s\|(% style="width:190px" %)0.0s\|(% style="width:80px" %)○\|(% style="width:87px" %)0601
	434	\|=(% style="width: 97px;" %)F6.02\|(% style="width:320px" %)Relay1 Open Delay Time\|(% style="width:428px" %)0.0s～100.0s\|(% style="width:190px" %)0.0s\|(% style="width:80px" %)○\|(% style="width:87px" %)0602
7.2	435	\|=(% style="width: 97px;" %)F6.03\|(% style="width:320px" %)(((
1.1	436	User defined output
	437
	438	Variability option（EX）
7.2	439	)))\|(% style="width:428px" %)(((
	440	* 0: Running Frequency
	441	* 1: Set Frequency
	442	* 2: Bus Voltage
	443	* 3: Output Voltage
	444	* 4: Output Current
7.3	445	)))\|(% style="width:190px" %)0\|(% style="width:80px" %)○\|(% style="width:87px" %)0603
7.2	446	\|=(% style="width: 97px;" %)F6.04\|(% style="width:320px" %)User defined comparison method\|(% style="width:428px" %)Units digit：comparison test method(((
	447	* 0: Equal (EX==X1)
	448	* 1: Equal or greater than
	449	* 2: Equal or less than
	450	* 3: Interval comparison (X1≤EX≤X2)
	451	* 4: Units digit test (EX&X1=X2)
	452
1.1	453	Tens digit: output method
7.2	454
	455	* 0: False value output
	456	* 1: Real value output
7.3	457	)))\|(% style="width:190px" %)0\|(% style="width:80px" %)○\|(% style="width:87px" %)0604
	458	\|=(% style="width: 97px;" %)F6.05\|(% style="width:320px" %)User defined output dead zone\|(% style="width:428px" %)0～65535\|(% style="width:190px" %)0\|(% style="width:80px" %)○\|(% style="width:87px" %)0605
7.2	459	\|=(% style="width: 97px;" %)F6.06\|(% style="width:320px" %)(((
1.1	460	User-defined output
	461
	462	comparison value 1
7.3	463	)))\|(% style="width:428px" %)0～65535\|(% style="width:190px" %)0\|(% style="width:80px" %)○\|(% style="width:87px" %)0606
7.2	464	\|=(% style="width: 97px;" %)F6.07\|(% style="width:320px" %)(((
1.1	465	User-defined output
	466
	467	comparison value 2
7.3	468	)))\|(% style="width:428px" %)0～65535\|(% style="width:190px" %)0\|(% style="width:80px" %)○\|(% style="width:87px" %)0607
7.2	469	\|=(% style="width: 97px;" %)F6.08\|(% style="width:320px" %)AO1 Output Option\|(% rowspan="2" style="width:428px" %)(((
	470	* 0: Running Frequency（0～F0.05）
	471	* 1: Set Frequency（0～F0.05）
	472	* 2: Output Current（0～Double Rated Current of VFD）
	473	* 3: Output Voltage（0～1.2times of VFD Rated Output Voltage）
	474	* 4: AI（0～10V）
	475	* 5: Bus Voltage（0～500.0/1000.0V）
7.3	476	)))\|(% style="width:190px" %)0\|(% style="width:80px" %)○\|(% style="width:87px" %)0608
	477	\|=(% style="width: 97px;" %)F6.09\|(% style="width:320px" %)AO2 Output Option\|(% style="width:190px" %)0\|(% style="width:80px" %)○\|(% style="width:87px" %)0609
	478	\|=(% style="width: 97px;" %)F6.10\|(% style="width:320px" %)AO1 offset coefficient\|(% style="width:428px" %)-100.0%～+100.0%\|(% style="width:190px" %)0.0%\|(% style="width:80px" %)○\|(% style="width:87px" %)060A
	479	\|=(% style="width: 97px;" %)F6.11\|(% style="width:320px" %)AO1 gain\|(% style="width:428px" %)-10.00～+10.00\|(% style="width:190px" %)1.00\|(% style="width:80px" %)○\|(% style="width:87px" %)060B
	480	\|=(% style="width: 97px;" %)F6.12\|(% style="width:320px" %)AO2 offset coefficient\|(% style="width:428px" %)-100.0%～+100.0%\|(% style="width:190px" %)0.0%\|(% style="width:80px" %)○\|(% style="width:87px" %)060C
	481	\|=(% style="width: 97px;" %)F6.13\|(% style="width:320px" %)AO2 offset coefficient\|(% style="width:428px" %)-10.00～+10.00\|(% style="width:190px" %)1.00\|(% style="width:80px" %)○\|(% style="width:87px" %)060D
	482	\|=(% style="width: 97px;" %)F7.00\|(% style="width:320px" %)Reserved\|(% style="width:428px" %)Reserved\|(% style="width:190px" %)0\|(% style="width:80px" %)○\|(% style="width:87px" %)0700
7.2	483	\|=(% style="width: 97px;" %)F7.01\|(% style="width:320px" %)STOP Button Function\|(% style="width:428px" %)(((
	484	* 0: Valid only at keypad control mode
	485	* 1: Valid at all control modes
7.3	486	)))\|(% style="width:190px" %)1\|(% style="width:80px" %)○\|(% style="width:87px" %)0701
7.2	487	\|=(% style="width: 97px;" %)F7.02\|(% style="width:320px" %)LED display parameters at running status\|(% rowspan="2" style="width:428px" %)(((
	488	* Bit0: Running Frequency(Hz)
	489	* Bit1: Set Frequency(Hz)
	490	* Bit2: Bus Voltage(V)
	491	* Bit3: Output Voltage(V)
	492	* Bit4: Output Current(A)
	493	* Bit5: DI Input Status
	494	* Bit6: DO Output Status
	495	* Bit7: Keypad Knob Voltage(V)
	496	* Bit8: AIVoltage(V)
	497	* Bit9: Load Speed
	498	* Bit10: PID Set Value
	499	* Bit11: PID Feedback Value
	500	* Bit12: PLC Stage
	501	* Bit13: Feedback Frequency（Unit：0.1Hz)
	502	* Bit14: Communication Set Value
	503	* Bit15: Main Frequency Source X
7.3	504	)))\|(% style="width:190px" %)0x1F\|(% style="width:80px" %)○\|(% style="width:87px" %)0702
	505	\|=(% style="width: 97px;" %)F7.03\|(% style="width:320px" %)LED display parameters at stop status\|(% style="width:190px" %)0x06\|(% style="width:80px" %)○\|(% style="width:87px" %)0703
	506	\|=(% style="width: 97px;" %)F7.04\|(% style="width:320px" %)Load speed display coefficient\|(% style="width:428px" %)0.0001～6.5000\|(% style="width:190px" %)3.000\|(% style="width:80px" %)○\|(% style="width:87px" %)0704
	507	\|=(% style="width: 97px;" %)F7.05\|(% style="width:320px" %)Software Version\|(% style="width:428px" %)-\|(% style="width:190px" %)-\|(% style="width:80px" %)◎\|(% style="width:87px" %)0705
	508	\|=(% style="width: 97px;" %)F8.00\|(% style="width:320px" %)Jog Running Frequency\|(% style="width:428px" %)0.00Hz～F0.05\|(% style="width:190px" %)2.00Hz\|(% style="width:80px" %)○\|(% style="width:87px" %)0800
	509	\|=(% style="width: 97px;" %)F8.01\|(% style="width:320px" %)Jog Acceleration Time\|(% style="width:428px" %)0.0s～100.0s\|(% style="width:190px" %)10.0s\|(% style="width:80px" %)○\|(% style="width:87px" %)0801
	510	\|=(% style="width: 97px;" %)F8.02\|(% style="width:320px" %)Jog Deceleration Time\|(% style="width:428px" %)0.0s～100.0s\|(% style="width:190px" %)10.0s\|(% style="width:80px" %)○\|(% style="width:87px" %)0802
	511	\|=(% style="width: 97px;" %)F8.03\|(% style="width:320px" %)FWD/REV dead zone time\|(% style="width:428px" %)0.0s～100.0s\|(% style="width:190px" %)0.0s\|(% style="width:80px" %)○\|(% style="width:87px" %)0803
7.2	512	\|=(% style="width: 97px;" %)F8.04\|(% style="width:320px" %)Reverse control\|(% style="width:428px" %)(((
	513	* 0: valid
	514	* 1: invalid
7.3	515	)))\|(% style="width:190px" %)0\|(% style="width:80px" %)○\|(% style="width:87px" %)0804
	516	\|=(% style="width: 97px;" %)F8.05\|(% style="width:320px" %)Reserved\|(% style="width:428px" %)0\|(% style="width:190px" %)0\|(% style="width:80px" %)●\|(% style="width:87px" %)0805
7.2	517	\|=(% style="width: 97px;" %)F8.06\|(% style="width:320px" %)Startup Protection Option\|(% style="width:428px" %)(((
	518	* 0：Invalid
	519	* 1：Valid
7.3	520	)))\|(% style="width:190px" %)0\|(% style="width:80px" %)○\|(% style="width:87px" %)0806
7.2	521	\|=(% style="width: 97px;" %)F8.07\|(% style="width:320px" %)Terminal jogging priority\|(% style="width:428px" %)(((
	522	* 0: Invalid
	523	* 1: Valid
7.3	524	)))\|(% style="width:190px" %)1\|(% style="width:80px" %)○\|(% style="width:87px" %)0807
	525	\|=(% style="width: 97px;" %)FC.00\|(% style="width:320px" %)Local Addresse\|(% style="width:428px" %)1～30，0 for broadcast addresse\|(% style="width:190px" %)1\|(% style="width:80px" %)○\|(% style="width:87px" %)0C00
7.2	526	\|=(% style="width: 97px;" %)FC.01\|(% style="width:320px" %)Baud Rate\|(% style="width:428px" %)(((
	527	* 0: 4800bPS
	528	* 1: 9600bPS
	529	* 2: 19200bPS
7.3	530	)))\|(% style="width:190px" %)1\|(% style="width:80px" %)○\|(% style="width:87px" %)0C01
7.2	531	\|=(% style="width: 97px;" %)FC.02\|(% style="width:320px" %)Data format\|(% style="width:428px" %)(((
	532	* 0: No check, data format (8.N.1)
	533	* 1: Odd Parity check, data format (8.O.1)
	534	* 2: Even parity check, data format (8.E.1)
7.3	535	)))\|(% style="width:190px" %)0\|(% style="width:80px" %)○\|(% style="width:87px" %)0C02
	536	\|=(% style="width: 97px;" %)FC.03\|(% style="width:320px" %)Respond Delay\|(% style="width:428px" %)0ms～20ms\|(% style="width:190px" %)2\|(% style="width:80px" %)○\|(% style="width:87px" %)0C03
	537	\|=(% style="width: 97px;" %)FC.04\|(% style="width:320px" %)Reserved\|(% style="width:428px" %)0\|(% style="width:190px" %)0\|(% style="width:80px" %)●\|(% style="width:87px" %)0C04
	538	\|=(% style="width: 97px;" %)FD.00\|(% style="width:320px" %)Multistage speed 0\|(% style="width:428px" %)-100.0%～100.0%(100.0% as F0.05)\|(% style="width:190px" %)0.00%\|(% style="width:80px" %)○\|(% style="width:87px" %)0D00
	539	\|=(% style="width: 97px;" %)FD.01\|(% style="width:320px" %)Multistage speed 1\|(% style="width:428px" %)-100.0%～100.0%\|(% style="width:190px" %)0.00%\|(% style="width:80px" %)○\|(% style="width:87px" %)0D01
	540	\|=(% style="width: 97px;" %)FD.02\|(% style="width:320px" %)Multistage speed 2\|(% style="width:428px" %)-100.0%～100.0%\|(% style="width:190px" %)0.00%\|(% style="width:80px" %)○\|(% style="width:87px" %)0D02
	541	\|=(% style="width: 97px;" %)FD.03\|(% style="width:320px" %)Multistage speed 3\|(% style="width:428px" %)-100.0%～100.0%\|(% style="width:190px" %)0.00%\|(% style="width:80px" %)○\|(% style="width:87px" %)0D03
7.2	542	\|=(% style="width: 97px;" %)FD.04\|(% style="width:320px" %)Simple PLC running mode\|(% style="width:428px" %)(((
	543	* 0: Stop after the AC Drive runs one cycle
	544	* 1: Keep final values after the AC Drive runs one cycle
	545	* 2: Repeat after the AC Drive runs one cycle
7.3	546	)))\|(% style="width:190px" %)0\|(% style="width:80px" %)○\|(% style="width:87px" %)0D04
7.2	547	\|=(% style="width: 97px;" %)FD.05\|(% style="width:320px" %)Simple PLC retentive option\|(% style="width:428px" %)Units Digit: Reserved
	548	Tens Digit：(((
	549	* 0: Invalid
	550	* 1: Valid
7.3	551	)))\|(% style="width:190px" %)0\|(% style="width:80px" %)○\|(% style="width:87px" %)0D05
	552	\|=(% style="width: 97px;" %)FD.06\|(% style="width:320px" %)Running time of simple PLC reference 0\|(% style="width:428px" %)0.0s(h)～100.0s(h)\|(% style="width:190px" %)0.0s(h)\|(% style="width:80px" %)○\|(% style="width:87px" %)0D06
	553	\|=(% style="width: 97px;" %)FD.07\|(% style="width:320px" %)Acceleration/deceleration time of simple PLC reference 0\|(% style="width:428px" %)0～3\|(% style="width:190px" %)0\|(% style="width:80px" %)○\|(% style="width:87px" %)0D07
	554	\|=(% style="width: 97px;" %)FD.08\|(% style="width:320px" %)Running time of simple PLC reference 1\|(% style="width:428px" %)0.0～100.0\|(% style="width:190px" %)0.0s(h)\|(% style="width:80px" %)○\|(% style="width:87px" %)0D08
	555	\|=(% style="width: 97px;" %)FD.09\|(% style="width:320px" %)Acceleration/deceleration time of simple PLC reference 1\|(% style="width:428px" %)0~~3\|(% style="width:190px" %)0\|(% style="width:80px" %)○\|(% style="width:87px" %)0D09
	556	\|=(% style="width: 97px;" %)FD.10\|(% style="width:320px" %)Running time of simple PLC reference 2\|(% style="width:428px" %)0.0 ~~100.0\|(% style="width:190px" %)0.0s(h)\|(% style="width:80px" %)○\|(% style="width:87px" %)0D0A
	557	\|=(% style="width: 97px;" %)FD.11\|(% style="width:320px" %)Acceleration/deceleration time of simple PLC reference 2\|(% style="width:428px" %)0~~3\|(% style="width:190px" %)0\|(% style="width:80px" %)○\|(% style="width:87px" %)0D0B
	558	\|=(% style="width: 97px;" %)FD.12\|(% style="width:320px" %)Running time of simple PLC reference 3\|(% style="width:428px" %)0.0~~100.0\|(% style="width:190px" %)0.0s(h)\|(% style="width:80px" %)○\|(% style="width:87px" %)0D0C
	559	\|=(% style="width: 97px;" %)FD.13\|(% style="width:320px" %)Acceleration/deceleration time of simple PLC reference 3\|(% style="width:428px" %)0~~3\|(% style="width:190px" %)0\|(% style="width:80px" %)○\|(% style="width:87px" %)0D0D
7.2	560	\|=(% style="width: 97px;" %)FD.14\|(% style="width:320px" %)Time unit of simple PLC running\|(% style="width:428px" %)(((
	561	* 0: s（second）
	562	* 1: h（hour）
	563	* 2: min（minute）
7.3	564	)))\|(% style="width:190px" %)0\|(% style="width:80px" %)○\|(% style="width:87px" %)0D0E
7.2	565	\|=(% style="width: 97px;" %)FD.15\|(% style="width:320px" %)The source of multistage speed 0\|(% style="width:428px" %)(((
	566	* 0: Set by FD.00
	567	* 1: AI
7.3	568	)))\|(% style="width:190px" %)0\|(% style="width:80px" %)○\|(% style="width:87px" %)0D0F
1.1	569
5.1	570	== Monitoring Parameters ==
1.1	571
7.3	572	\|=(% scope="row" %)Parameter\|=Name\|=(% style="width: 257px;" %)Minimum Unit\|=(% style="width: 160px;" %)Priority\|=(% style="width: 113px;" %)Address
	573	\|=D0.00\|Running Frequency(Hz)\|(% style="width:257px" %)0.01Hz\|(% style="width:160px" %)◎\|(% style="width:113px" %)D000
	574	\|=D0.01\|Set Frequency(Hz)\|(% style="width:257px" %)0.01Hz\|(% style="width:160px" %)◎\|(% style="width:113px" %)D001
	575	\|=D0.02\|Bus Voltage(V)\|(% style="width:257px" %)0.1V\|(% style="width:160px" %)◎\|(% style="width:113px" %)D002
	576	\|=D0.03\|Output Voltage(V)\|(% style="width:257px" %)1V\|(% style="width:160px" %)◎\|(% style="width:113px" %)D003
	577	\|=D0.04\|Output Current(A)\|(% style="width:257px" %)0.01A\|(% style="width:160px" %)◎\|(% style="width:113px" %)D004
	578	\|=D0.05\|IGBT Module Temperature（℃）\|(% style="width:257px" %)0.1℃\|(% style="width:160px" %)◎\|(% style="width:113px" %)D005
	579	\|=D0.06\|DI Input Status\|(% style="width:257px" %)1\|(% style="width:160px" %)◎\|(% style="width:113px" %)D006
	580	\|=D0.07\|DO Output Status\|(% style="width:257px" %)1\|(% style="width:160px" %)◎\|(% style="width:113px" %)D007
	581	\|=D0.08\|Keypad Knob Voltage\|(% style="width:257px" %)0.01V\|(% style="width:160px" %)◎\|(% style="width:113px" %)D008
	582	\|=D0.09\|AI Voltage(V)\|(% style="width:257px" %)0.01V\|(% style="width:160px" %)◎\|(% style="width:113px" %)D009
	583	\|=D0.10\|Reserved\|(% style="width:257px" %)1\|(% style="width:160px" %)◎\|(% style="width:113px" %)D010
	584	\|=D0.13\|PLC Stage\|(% style="width:257px" %)1\|(% style="width:160px" %)◎\|(% style="width:113px" %)D013
	585	\|=D0.14\|Feedback Speed(Unit0.1Hz)\|(% style="width:257px" %)0.1Hz\|(% style="width:160px" %)◎\|(% style="width:113px" %)D014
1.1	586
5.1	587	== Error Records ==
1.1	588
7.3	589	\|=(% scope="row" %)Parameter\|=Name\|=(% style="width: 429px;" %)Range and Description\|=(% style="width: 124px;" %)Priority\|=(% style="width: 129px;" %)Address
	590	\|=E0.00\|Latest error type\|(% style="width:429px" %)(((
	591	* No Error: 0
	592	* Acceleration Over Current: Err02
	593	* Deceleration Over Current: Err03
	594	* Over Current at constant speed: Err04
	595	* Acceleration Over Voltage: Err05
	596	* Deceleration Over Voltage: Err06
	597	* Over Voltage at constant speed: Err07
	598	* Low Voltage error: Err09
	599	* VFD overload: Err10
	600	* Motor overload: Err11
	601	* IGBT overheat: Err14
	602	* External Error: Err15
	603	* Current Detection Error: Err18
	604	* Parameter writing/reading error: Err21
	605	* EEPROM writing/reading error: Err22
	606	)))\|(% style="width:124px" %)●\|(% style="width:129px" %)　E000
	607	\|=E0.01\|Running Frequency at latest error\|(% style="width:429px" %)0.0Hz~~F0.05\|(% style="width:124px" %)●\|(% style="width:129px" %)　E001
	608	\|=E0.02\|Output Current at latest error\|(% style="width:429px" %)0.00~~655.35\|(% style="width:124px" %)●\|(% style="width:129px" %)　E002
	609	\|=E0.03\|Bus Voltage at latest error\|(% style="width:429px" %)0.0~~810\|(% style="width:124px" %)●\|(% style="width:129px" %)　E003
	610	\|=E0.04\|Input terminals status at latest error\|(% style="width:429px" %)0~~63\|(% style="width:124px" %)●\|(% style="width:129px" %)　E004
	611	\|=E0.05\|IGBT temperature at latest error\|(% style="width:429px" %)0~~65535\|(% style="width:124px" %)●\|(% style="width:129px" %)　E005
	612	\|=E1.00\|Former error type\|(% style="width:429px" %)As E0.00\|(% style="width:124px" %)●\|(% style="width:129px" %)　E100
	613	\|=E1.01\|Running Frequency at former error\|(% style="width:429px" %)0.0Hz~~F0.05\|(% style="width:124px" %)●\|(% style="width:129px" %)　E101
	614	\|=E1.02\|Output Current at former error\|(% style="width:429px" %)0.00~~655.35\|(% style="width:124px" %)●\|(% style="width:129px" %)　E102
	615	\|=E1.03\|Bus Voltage at former error\|(% style="width:429px" %)0.0~~810\|(% style="width:124px" %)●\|(% style="width:129px" %)　E103
	616	\|=E1.04\|Input terminals status at former error\|(% style="width:429px" %)0~~63\|(% style="width:124px" %)●\|(% style="width:129px" %)　E104
	617	\|=E1.05\|IGBT temperature at former error\|(% style="width:429px" %)0~~65535\|(% style="width:124px" %)●\|(% style="width:129px" %)　E105
1.1	618
14.1	619	= Communication Protocol =
1.1	620
	621	VM Series AC Drive provides RS485 communication interface and supports Modbus communication protocol. Users can achieve centralized control by computer or PLC, set AC Drive operation commands, modify or read function code parameters, read the working state and fault info of the AC Drive.
	622
5.1	623	== Communication Control Address ==
1.1	624
7.3	625	\|=(% scope="row" style="width: 284px;" %)Function\|=(% style="width: 134px;" %)Address\|=(% style="width: 360px;" %)Description\|=(% style="width: 276px;" %)Remarks\|=Characteristic
	626	\|=(% style="width: 284px;" %)Communication Set Value\|(% style="width:134px" %)1000H\|(% style="width:360px" %)-10000～10000 (with ± sign)\|(% style="width:276px" %)F0.05* (±100.00%)\|R/W
	627	\|=(% rowspan="7" style="width: 284px;" %)Control Command\|(% rowspan="7" style="width:134px" %)2000H\|(% style="width:360px" %)0001: Forward running\|(% style="width:276px" %)-\|W
	628	\|(% scope="row" style="width:360px" %)0002: Reverse running\|(% style="width:276px" %)-\|W
	629	\|(% scope="row" style="width:360px" %)0003: JOG forward\|(% style="width:276px" %)-\|W
	630	\|(% scope="row" style="width:360px" %)0004: JOG reverse\|(% style="width:276px" %)-\|W
	631	\|(% scope="row" style="width:360px" %)0005: Free stop\|(% style="width:276px" %)-\|W
	632	\|(% scope="row" style="width:360px" %)0006: Deceleration stop\|(% style="width:276px" %)-\|W
	633	\|(% scope="row" style="width:360px" %)0007: Fault reset\|(% style="width:276px" %)-\|W
	634	\|=(% rowspan="3" style="width: 284px;" %)Running Status\|(% rowspan="3" style="width:134px" %)3000H\|(% style="width:360px" %)0001: FWD running\|(% style="width:276px" %)-\|R
	635	\|(% scope="row" style="width:360px" %)0002: REV running\|(% style="width:276px" %)-\|R
	636	\|(% scope="row" style="width:360px" %)0003: Stopped\|(% style="width:276px" %)-\|R
	637	\|=(% rowspan="11" style="width: 284px;" %)Monitoring Data\|(% style="width:134px" %)1001H\|(% style="width:360px" %)Running Frequency（Hz）\|(% style="width:276px" %)2 decimal places\|R
	638	\|(% scope="row" style="width:134px" %)1002H\|(% style="width:360px" %)Set Frequency（Hz）\|(% style="width:276px" %)2 decimal places\|R
	639	\|(% scope="row" style="width:134px" %)1003H\|(% style="width:360px" %)Bus Voltage（V）\|(% style="width:276px" %)1 decimal place\|R
	640	\|(% scope="row" style="width:134px" %)1004H\|(% style="width:360px" %)Output Voltage（V）\|(% style="width:276px" %)1 decimal place\|R
	641	\|(% scope="row" style="width:134px" %)1005H\|(% style="width:360px" %)Output Current（A）\|(% style="width:276px" %)2 decimal places\|R
	642	\|(% scope="row" style="width:134px" %)1006H\|(% style="width:360px" %)IGBT Temperature\|(% style="width:276px" %)1 decimal place\|R
	643	\|(% scope="row" style="width:134px" %)1007H\|(% style="width:360px" %)Digital input status\|(% style="width:276px" %)DI1-DI4 Added by binary bit weight\|R
	644	\|(% scope="row" style="width:134px" %)1009H\|(% style="width:360px" %)Keypad Knob Voltage（V）\|(% style="width:276px" %)1 decimal place\|R
	645	\|(% scope="row" style="width:134px" %)101AH\|(% style="width:360px" %)AI Volatage （V）\|(% style="width:276px" %)1 decimal place\|R
	646	\|(% scope="row" style="width:134px" %)100BH\|(% style="width:360px" %)Load Speed Display\|(% style="width:276px" %)1 decimal place\|R
	647	\|(% scope="row" style="width:134px" %)100EH\|(% style="width:360px" %)PLC Stage\|(% style="width:276px" %)Simple PLC running stage\|R
	648	\|=(% rowspan="14" style="width: 284px;" %)Failure status\|(% rowspan="14" style="width:134px" %)8000H\|(% style="width:360px" %)0000: No error\|(% style="width:276px" %)-\|R
	649	\|(% scope="row" style="width:360px" %)0002: Acceleration Over Current\|(% style="width:276px" %)-\|R
	650	\|(% scope="row" style="width:360px" %)0003: Acceleration Over Current\|(% style="width:276px" %)-\|R
	651	\|(% scope="row" style="width:360px" %)0004: Over Current at Constant Speed\|(% style="width:276px" %)-\|R
	652	\|(% scope="row" style="width:360px" %)0005: Acceleration Over Voltage\|(% style="width:276px" %)-\|R
	653	\|(% scope="row" style="width:360px" %)0006: Deceleration Over Voltage\|(% style="width:276px" %)-\|R
	654	\|(% scope="row" style="width:360px" %)0007: Over Voltage at Constant Speed\|(% style="width:276px" %)-\|R
	655	\|(% scope="row" style="width:360px" %)0009: Low Voltage Error\|(% style="width:276px" %)-\|R
	656	\|(% scope="row" style="width:360px" %)000A: VFD Overload\|(% style="width:276px" %)-\|R
	657	\|(% scope="row" style="width:360px" %)000B: Motor Overload\|(% style="width:276px" %)-\|R
	658	\|(% scope="row" style="width:360px" %)000E: IGBT Overheat\|(% style="width:276px" %)-\|R
	659	\|(% scope="row" style="width:360px" %)000F: External Error\|(% style="width:276px" %)-\|R
	660	\|(% scope="row" style="width:360px" %)0012: Current Detection Error\|(% style="width:276px" %)-\|R
	661	\|(% scope="row" style="width:360px" %)0015: Parameters Writing/Reading Error\|(% style="width:276px" %)-\|R
	662	\|=(% rowspan="9" style="width: 284px;" %)Communication Error Feedback\|(% rowspan="9" style="width:134px" %)8001H\|(% style="width:360px" %)0000: No Error\|(% style="width:276px" %)-\|R
	663	\|(% scope="row" style="width:360px" %)0001: Password Error\|(% style="width:276px" %)-\|R
	664	\|(% scope="row" style="width:360px" %)0002: Command Code Error\|(% style="width:276px" %)-\|R
	665	\|(% scope="row" style="width:360px" %)0003: CRCError\|(% style="width:276px" %)-\|R
	666	\|(% scope="row" style="width:360px" %)0004: Invalid Address\|(% style="width:276px" %)-\|R
	667	\|(% scope="row" style="width:360px" %)0005: Invalid Parameter\|(% style="width:276px" %)-\|R
	668	\|(% scope="row" style="width:360px" %)0006: Parameters Adjustment Failed\|(% style="width:276px" %)-\|R
	669	\|(% scope="row" style="width:360px" %)0007: System Locked\|(% style="width:276px" %)-\|R
	670	\|(% scope="row" style="width:360px" %)0008: Parameters Being Saved\|(% style="width:276px" %)-\|R
1.1	671
	672	Sheet 5-1-1 Control Command Addresses
	673
5.1	674	== EEPROM Addresses Introduction ==
1.1	675
	676	The addresses listed in the sheet above is the way of writing RAM. The RAM stores the data after power-off and does not save it. In the communication mode, for the write command "06H", if the parameter needs to be stored after power-off, the method of writing EEPROM should be used. The original "0" of the most significant bit of the RAM address is changed to "F", which is converted into the corresponding EEPROM address, for example: "0XXX" is changed to "FXXX"
	677
	678	Example of address conversion: Upper limit frequency F006, write RAM communication address: 0006, corresponding EEPROM address: F006.
	679
	680	Acceleration time F010, the communication address for writing RAM is: 000A, and the corresponding address for EEPROM is: F00A.
	681
	682	Other parameters, are like that...
	683
	684	It should be noted that the erasing life of EEPROM is about 1 million times. After exceeding the erasing times, it will affect the reliability of data storage. If it is not necessary, it is recommended to control the communication by writing to RAM.
	685
14.1	686	= Troubleshooting & countermeasures =
1.1	687
5.1	688	== Faults and solutions ==
1.1	689
7.3	690	\|=(% scope="row" %)Fault code\|=Fault type\|=Reason\|=Solution
	691	\|=Err02\|Overcurrent during acceleration\|(((
1.1	692	~1. The output circuit of AC Drive is grounded or short circuited.
	693
	694	2. The acceleration time is too short.
	695
	696	3. The startup operation is performed on the rotating motor.
	697
	698	4. The AC Drive model is of too small power.
	699	)))\|(((
	700	~1. Eliminate external faults.
	701
	702	2. Increase the acceleration time.
	703
	704	3. Select rotational speed tracking restart or start the motor after it stops.
	705
	706	4. Select the AC Drive of higher power.
	707	)))
7.3	708	\|=Err03\|Overcurrent during deceleration\|(((
1.1	709	~1. The output circuit of AC Drive is grounded or short circuited.
	710
	711	2. The deceleration time is too short.
	712	)))\|(((
	713	~1. Eliminate external faults.
	714
	715	2. Increase the deceleration time.
	716	)))
7.3	717	\|=Err04\|Overcurrent at constant speed\|(((
1.1	718	~1. The output circuit of AC Drive is grounded or short circuited.
	719
	720	2. The AC Drive model is of too small power.
	721	)))\|(((
	722	~1. Eliminate external faults.
	723
	724	2. Select the AC Drive of higher power.
	725	)))
7.3	726	\|=Err05\|Overvoltage during acceleration\|(((
1.1	727	~1. Input voltage abnormal.
	728
	729	2. An external force drives the motor during acceleration.
	730
	731	3. The acceleration time is too short.
	732
	733	4. The braking unit and braking resistor are not installed.
	734	)))\|(((
	735	~1. Turn the input power to the normal range.
	736
	737	2. Cancel the external force.
	738
	739	3. Increase the acceleration time.
	740
	741	4. Installed the braking unit and braking resistor.
	742	)))
7.3	743	\|=Err06\|Overvoltage during deceleration\|(((
1.1	744	~1. Input voltage abnormal.
	745
	746	2. An external force drives the motor during deceleration.
	747
	748	3. The deceleration time is too short.
	749
	750	4. The braking unit and braking resistor are not installed.
	751	)))\|(((
	752	~1. Turn the input power to the normal range.
	753
	754	2. Cancel the external force.
	755
	756	3. Increase the deceleration time.
	757
	758	4. Installed the braking unit and braking resistor.
	759	)))
7.3	760	\|=Err07\|Overvoltage at constant speed\|(((
1.1	761	~1. Input voltage abnormal.
	762
	763	2. An external force drives the motor during deceleration.
	764	)))\|(((
	765	~1. Turn the input power to the normal range.
	766
	767	2. Cancel the external force.
	768	)))
7.3	769	\|=Err09\|Undervoltage\|(((
1.1	770	~1. Instantaneous power failure occurs on the input supply.
	771
	772	2. The input voltage is not within the normal range.
	773
	774	3. The AC Drive has an abnormality.
	775	)))\|(((
	776	~1. Reset the fault.
	777
	778	2. Adjust the input voltage to normal range.
	779
	780	3. Looking for technical service.
	781	)))
7.3	782	\|=Err10\|AC Drive overload\|(((
1.1	783	~1. The load is too heavy or lockedrotor occurs on motor.
	784
	785	2. The AC Drive model is of too small power.
	786	)))\|(((
	787	~1. Reduce the load and check the motor.
	788
	789	2. Select the AC Drive of higher power.
	790	)))
7.3	791	\|=Err11\|Motor overload\|(((
1.1	792	The parameter setting of F2.03 does not match the motor
	793
	794	2. The AC Drive model is of too small power.
	795	)))\|(((
	796	~1. Set this parameter correctly.
	797
	798	2. Reduce the load and check the motor.
	799	)))
7.3	800	\|=Err14\|Module overheating\|(((
1.1	801	~1. The ambient temperature is too high.
	802
	803	2. The air filter is blocked.
	804
	805	3. The fan is damaged.
	806
	807	4. The IGBT is damaged.
	808	)))\|(((
	809	~1. Lower the ambient temperature.
	810
	811	2. Clean the air filter.
	812
	813	3. Replace the fan.
	814
	815	4. Ask for technical service.
	816	)))
7.3	817	\|=Err15\|External equipment fault\|External fault signal (DI) triggers\|1. Check the input DI terminal
	818	\|=Err16\|Communication fault\|(((
1.1	819	~1. The PC is in abnormal state.
	820
	821	2. The communication cable is faulty.
	822
	823	3. The communication parameters of FC group are set improperly.
	824	)))\|(((
	825	~1. Check the cabling of the PC.
	826
	827	2. Check the communication cabling.
	828
	829	3. Set the communication parameters properly.
	830	)))
7.3	831	\|=Err18\|Current detection fault\|(((
1.1	832	~1. Current detection circuit is abnormal.
	833
	834	2. Control circuit is abnormal.
	835	)))\|1. Ask for technical service.
7.3	836	\|=Err21\|Data overflow\|1. The control board is abnormal.\|1. Ask for technical service.
	837	\|=Err22\|On-power EEPROM check fault\|1. The EEPROM chip is damaged.\|1. Ask for technical service.
1.1	838
	839	Table 6-1-1 Faults and solutions
	840
5.1	841	== Common faults and solutions ==
1.1	842
8.1	843	\|=(% scope="row" style="width: 59px;" %)SN\|=(% style="width: 232px;" %)Fault\|=(% style="width: 437px;" %)Possible causes\|=(% style="width: 475px;" %)Solutions
	844	\|=(% style="width: 59px;" %)1\|(% style="width:232px" %)No display at power-on state\|(% style="width:437px" %)(((
1.1	845	~1. The input power of AC Drive is abnormal.
	846
	847	2. The control board has a bad contact with cable that is connected to the keypad.
	848
	849	3. The AC Drive is abnormal.
8.1	850	)))\|(% style="width:475px" %)(((
1.1	851	~1. Check the input power.
	852
	853	2. Re-connect the cable.
	854
	855	3. Ask for technical service.
	856	)))
8.1	857	\|=(% style="width: 59px;" %)2\|(% style="width:232px" %)The motor does not rotate after the AC Drive runs.\|(% style="width:437px" %)(((
1.1	858	~1. The motor is damaged.
	859
	860	2. The motor cables is abnormal.
	861
	862	3. The cable between the drive board and control board is in poor contact.
	863
	864	4. The AC Drive is abnormal.
8.1	865	)))\|(% style="width:475px" %)(((
1.1	866	~1. Replay the motor.
	867
	868	2. Ensure the cable between the AC Drive and the motor is normal.
	869
	870	3. Check the cable between the drive board and control board.
	871
	872	4. Ask for technical service.
	873	)))
8.1	874	\|=(% style="width: 59px;" %)3\|(% style="width:232px" %)DI termianls are disabled.\|(% style="width:437px" %)(((
1.1	875	~1. The parameters are set incorrectly.
	876
	877	2. The external signal is incorrect.
	878
	879	3. The control board is abnormal.
8.1	880	)))\|(% style="width:475px" %)(((
1.1	881	~1. Check and reset the parameters in group F5.
	882
	883	2. Re-connect the external signal cables.
	884
	885	3. Ask for technical service.
	886	)))
8.1	887	\|=(% style="width: 59px;" %)4\|(% style="width:232px" %)AC Drive interference\|(% style="width:437px" %)(((
1.1	888	~1. Carrier frequency setting is not suitable.
	889
	890	2. The grounding method of the AC Drive and the motor is incorrect.
	891
	892	3. The wire between the AC Drive and the motor is too long.
8.1	893	)))\|(% style="width:475px" %)(((
1.1	894	~1. Reduce the carrier frequency
	895
	896	2. The AC Drive and the motor are effectively grounded and separated from the ground of the peripheral device.
	897
	898	3. Install out reactor or reduce wire distance.
	899	)))
8.1	900	\|=(% style="width: 59px;" %)5\|(% style="width:232px" %)Motor noise is too loud.\|(% style="width:437px" %)(((
1.1	901	~1. Motor damage or mechanical failure.
	902
	903	2. Carrier frequency setting is too small.
8.1	904	)))\|(% style="width:475px" %)(((
1.1	905	~1. Replace the motor or clear the mechanical fault.
	906
	907	2. Increase the carrier frequency appropriately.
	908	)))
8.1	909	\|=(% style="width: 59px;" %)6\|(% style="width:232px" %)Switch trip\|(% style="width:437px" %)(((
1.1	910	~1. Installed a leakage switch or an air switch overload.
	911
	912	2. The input power of AC Drive is abnormal.
	913
	914	3. The AC Drive is damaged.
8.1	915	)))\|(% style="width:475px" %)(((
1.1	916	~1. Replay the leakage switch or replay the larfer capacity air switch.
	917
	918	2. Eliminate whether the input power is shorted.
	919
	920	3. Ask for technical service.
	921	)))
	922
	923	Table 6-2-1 Common faults and solutions

Wiki source code of 1 VM Series Manual V1.2

Navigation

Table of Contents